Shropshire · England
Bath Re-enamelling in Linley
Fixed-price bath re-enamelling in Linley and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
Work for landlords and builders
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Bath re-enamelling in Linley without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include stains that won’t shift and several chips and rust patches, across cast iron baths, Victorian roll-tops and basins & shower trays.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Linley (TF12, WV16)
- Region
- Shropshire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
What happens on the day
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. You can expect it to take most of the day, and we will keep you posted as we go.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the next day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
Get a quote
To get a price, send two or three pictures through our quote form or ring us. We will say immediately if a repair is the right fix.
Advice
Repair or replace in Linley?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
Why us?
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- We leave the room as we found it
See our full price list or bath cost comparison.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Leave the bath for the full curing time before using it
- Do not let dyes or oils sit on the finish
- Do not leave a chip unrepaired
- Clean with a soft cloth and mild detergent
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- How much damage there is
- How hard the colour is to match
- What kind of damage it is
- The material and finish
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- One picture of the whole bath
- One sharp close-up of the damage
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Linley questions
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
How do I get a price for bath re-enamelling in Linley?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up and a picture of the whole item with your TF12 postcode.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
When a repair isn’t the answer
A repair is not right for every job, including:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Where we work around Linley
Linley is about 4 miles north-west of Bridgnorth, in Shropshire. Jobs in Linley are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover 433 places in Shropshire. We work right across the region, from Linley to Birmingham (about 25 miles away).
Every address in TF12 and WV16 is within our area. We also travel to Linley Brook (1 mile south-west), Nordley (1 mile south), Willey (1 mile north-west), Morville (3 miles south) and Tasley (3 miles south). Within a short drive, we also cover Shrewsbury (15 miles north-west), Madeley (4 miles north), Coleham (15 miles north-west), Kingsland (15 miles north-west), Belle Vue (14 miles north-west) and Monkmoor (14 miles north-west).
What’s near Linley
We visit homes around St Leonard's Church. Other landmarks nearby include Bridgnorth Castle (3.9 miles south-east) and Bridgnorth Community Hospital (3.5 miles south-east).
Towns and villages near Linley
More services for Linley
About our accreditations · Every repair comes with a one-year guarantee.
