Swansea · Wales
Bath Re-enamelling for Lower Sketty homes
Problem with your bath in Lower Sketty? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coloured bath you want in white

Lower Sketty and nearby
Lower Sketty is about 2 miles south-west of Uplands, in Swansea. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover 153 places across Swansea.
Here we cover the SA2 and SA3 postcode area. From Mill Lane, Warwick Road and Ashleigh Road or a nearby road, we can come to you. Neighbouring places we cover include Penyrheol (1 mile north), Sketty (1 mile north), Brynmill (1 mile north-east), Tycoch (1 mile north) and Garn-Las (2 miles north). Within a short drive, we also cover Swansea (3 miles north-east), Castle (3 miles north-east), Morriston (6 miles north-east), Mount Pleasant (3 miles north-east), Gorseinon (5 miles north-west) and Dyfaty (3 miles north-east).
Local landmarks in Lower Sketty
Typical jobs here are in homes near Woodman pub, Mayals Primary School and Emmanuel Grammar School. Lower Sketty’s nearest station is Swansea station, roughly 3 miles north-east. Well-known places in the area include Oystermouth Castle (1.7 miles south) and Egypt Centre - Swansea University (1 mile north-east). The countryside around Lower Sketty includes Bishop's Wood and Pluck Lake.
How we handle bath re-enamelling in Lower Sketty
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s wear marks under the taps and a dull, rough surface that won’t come clean, we can typically put it right.
Whatever the size of the job, you get the same one-year guarantee in Lower Sketty and across Swansea.

- Where
- Lower Sketty (SA2, SA3)
- Area hub
- Swansea
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Other services in Lower Sketty
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What affects the price in Lower Sketty
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- What the surface is made of
- Whether we combine several jobs
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- Whether it’s been repaired or coated before
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
- What it’s made of, if you know
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Signs you need bath re-enamelling in Lower Sketty
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Contact us if you’ve noticed:
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- Several chips and rust patches
- A dull, rough surface that won’t come clean
What your quote should include
- How changes to the job are handled
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
What a repair cannot fix
To be straight with you, there are a few things a repair will not fix:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Lower Sketty
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- A dripping tap should be fixed promptly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Common questions in Lower Sketty
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Which areas do you work in?
Everywhere in the UK, Lower Sketty included. There is no extra charge for travel.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take the best part of a day, tidy-up included.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
Getting a price
Send us pictures of the damage and a wider shot of the entire item, with your SA2 postcode, and we’ll reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.

