Dorset · England
Bath Re-enamelling for Lulworth Cove homes
We travel to Lulworth Cove for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Lulworth Cove
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Whether it’s a dull, rough surface that won’t come clean and lots of chips and rust spots, we can usually put it right, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Lulworth Cove (BH20)
- County
- Dorset
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- How many areas need work
- Access to the area
- How many items we do on one visit
- Any earlier repairs that need removing first
We charge the same wherever you are, so there is no premium for Lulworth Cove. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- Where you are, by postcode
- Natural light rather than flash
- Details of any past repairs
- Something in shot to show the size
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Aftercare tips
So the finish stays in good condition:
- Never use suction bath mats
- Do not leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Towns and villages near Lulworth Cove
Other services in Lulworth Cove
Repairing versus replacing in Lulworth Cove
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- Same prices wherever you are
- No need to remove anything
- Fixed prices from your photos
- Technicians who travel to you, UK-wide
Read our full price list or resurfacing vs replacement cost guide.
Lulworth Cove: your questions answered
Do you cover the whole of Dorset?
We work UK-wide, and that includes Lulworth Cove. Our prices are the same everywhere.
What information do you need?
A close-up, a wider photo and your postcode. Then we will agree a date.
Do you cover Lulworth Cove?
Yes, we do. We send a technician to Lulworth Cove for every job, with no extra charge for travel.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
How long is the bath unusable?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
Our work in Lulworth Cove
Lulworth Cove is about 9 miles east of Weymouth, in Dorset. Whether you’re in the middle of Lulworth Cove or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 462 places in Dorset, from the larger towns to small villages.
We cover every part of the BH20 postcode area and the streets around it. Streets in the area include Main Road and Britwell Drive, all of which we cover. We also travel to West Lulworth (1 mile north), Lulworth Camp (1 mile north-east), Chaldon Herring (3 miles north-west), Coombe Keynes (3 miles north-east) and Winfrith Newburgh (3 miles north). We also work in nearby towns such as Weymouth (9 miles west), Dorchester (11 miles north-west), Broadstone (15 miles north-east), Corfe Mullen (15 miles north-east), Swanage (13 miles east) and Portland (10 miles south-west).
What’s near Lulworth Cove
Locally, our jobs take us to homes close to Parish Church of the Holy Trinity and Lulworth and Winfrith CofE VC Primary School, among other places. For rail, the closest station is Wool station, about 4.5 miles north. Green spaces nearby include Tadnoll and Winfrith Heath and Hambury Tout.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
What a repair cannot fix
To be straight with you, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
