Hampshire · England
Bath Re-enamelling for Lychpit homes
Bath re-enamelling in Lychpit without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- Wear marks under the taps
- A bath in a colour that no longer suits
Bath re-enamelling in Lychpit, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s lots of chips and rust spots and an outdated colour you’d like to change, we can help, whatever the material.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Lychpit (RG24)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Lychpit
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted any of these:
- Thin, worn enamel in places
- Lots of chips and rust spots
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
Questions to ask before you book
- Aftercare advice
- Whether the price covers travel
- How the colour is matched
- When it can be used again
FAQs for Lychpit
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
How do I get a price for bath re-enamelling in Lychpit?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Keeping it looking good
So the finish stays in good condition:
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
- Have chips seen to early
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Lychpit. What changes the price is:
- Whether we combine several jobs
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- Natural light rather than flash
- A photo taken from further back
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Repairing versus replacing in Lychpit
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- Repair technicians who travel to you, UK-wide
- Normally one visit, start to finish
- We’ll tell you if it’s not worth repairing
- No need to remove anything
Take a look at our pricing or bath cost comparison.
About Lychpit
Lychpit is about 2 miles east of Basingstoke, in Hampshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 683 places across Hampshire. Our nearest city page is London, about 44 miles away.
Our visits in RG24 are booked in the same way as anywhere else. You’ll find streets such as Park Lane, Crown Lane and Manor Lane, and we cover them all. Neighbouring places we cover include Old Basing (1 mile east), Eastrop (1 mile west), Chineham (1 mile north), Oakridge (2 miles west) and Mapledurwell (2 miles east). Within a short drive, we also cover Farnborough (12 miles east), Fleet (9 miles east), Aldershot (13 miles east), Alton (9 miles south), Yateley (11 miles north-east) and Tadley (7 miles north-west).
Around Lychpit
Typical jobs here are in homes near Old Basing Infant School, Eastrop Park and The Crown Public House and the streets around them. Nearby too are Church of St Mary (less than half a mile east), The Costello School (1.3 miles south-west) and The Costello School (1.3 miles south-west). The closest station to Lychpit is Basingstoke station, about 1.6 miles west of the centre. Other landmarks nearby include Basingstoke and North Hampshire Hospital (2.6 miles west) and Basing House (under half a mile south). The countryside around Lychpit includes Farleigh Hill and The Mill Field.
The process
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. You can expect it to take most of the day, and we will keep you posted as we go.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Getting a price
Most clients in Lychpit get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Nearby places to Lychpit
Other services in Lychpit
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- A metal bath with a through crack
Send us pictures and we will tell you honestly.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
