Swansea · Wales

Bath re-enamelling & resurfacing in Manselfield, Swansea

Bath re-enamelling across Manselfield and nearby, done in a single visit in most cases.

  • Resurfacing from £350
  • Enamel that’s lost its shine and feels rough
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Manselfield

How it works

Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a full day for most jobs. The room is left tidy and ready to use once it has cured.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Mention any parking restrictions or tricky access
  • Mention any earlier repairs or resurfacing
  • Have a window or extractor fan available

Get a quote

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

Send pictures for a quote

Read more

Bath re-enamelling in Manselfield without replacing anything

After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a period or roll-top bath worth keeping and chips and rust in more than one place, we can typically put it right.

Whatever the size of the job, it’s backed by a one-year guarantee.

Stained basin resurfaced to clean white (before and after)
Location
Manselfield (SA3)
County
Swansea
Cover
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026

Covering Manselfield

Manselfield is about 5 miles south-west of Swansea, in Swansea. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Manselfield is one of 153 places in Swansea where we work.

Every address in SA3 is within our area, from the main roads to the quietest streets. That includes homes on Mansel Drive, Reigit Lane and Manselfield Road. We also travel to Murton (1 mile west), Newton (1 mile south-east), Caswell (1 mile south), Pyle (1 mile south-west) and Bishopston (1 mile west). Further out, we also cover Swansea (5 miles north-east), Castle (5 miles north-east), Morriston (8 miles north-east), Mount Pleasant (5 miles north-east), Gorseinon (6 miles north) and Dyfaty (5 miles north-east).

What’s near Manselfield

Locally, our jobs take us to homes close to Whitestone Primary School, Bishopston Comprehensive School and Church of St Teilo. The nearest railway station is Gowerton station, roughly 4.7 miles north of the centre. A little further out are Bishopston Old Castle (1 mile north-west) and Egypt Centre - Swansea University (3.1 miles north-east). The countryside around Manselfield includes Bishop's Wood and Colts Hill.

Map of Manselfield © OpenStreetMap contributors

What affects the price in Manselfield

Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:

  • How many areas need work
  • Access to the area
  • Previous DIY repairs that have to come out
  • Whether it’s a chip, crack, burn or wear

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.

Send photos for a quote

A couple of clear pictures is all it takes. Try to include:

  • One picture of the entire bath
  • The material, if you know it
  • Natural light rather than flash
  • Any earlier repairs or coatings

For a price in Manselfield, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Keep suction mats out of the bath
  • Do not leave bottles, razors or sponges standing on the surface
  • Get any chip repaired quickly
  • Leave the bath for the full curing time before using it

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

Landlords, agents and businesses in Manselfield

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

If you manage property in Manselfield, we will quote for several properties at once. Send photos for each one and we’ll come back with a combined price.

Do you need bath re-enamelling in Manselfield?

In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.

Most people get in touch when they notice something like this:

  • A peeling or bubbling previous coating
  • Stains that won’t shift
  • An original cast iron bath that needs restoring
  • Lots of chips and rust spots

Questions to ask before you book

  • How long the guarantee is and what it covers
  • What aftercare is recommended
  • What preparation is included
  • Whether a trained technician does the job

Choosing a repair company

What a repair can’t fix

We will always be straight with you, so here’s what a repair won’t do:

  • A bath split right through the body
  • Acrylic that moves when you stand in it
  • Plumbing leaks, which need a plumber

If in doubt, send photos and we will say what we think.

What we work on

  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths

FAQs for Manselfield

What do you need from me?

Photos of the damage, a picture of the whole bath and your postcode. Then we’ll agree a date.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

Will there be a smell?

A little, depending on the job. Open windows and an extractor fan help.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

Do you cover Manselfield?

Yes. We work across the UK and come to Manselfield. Send photos and we’ll quote, or call 0345 017 0787.

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.