Swansea · Wales
Bath re-enamelling & resurfacing in Pyle, Swansea
Bath re-enamelling for Pyle, without a refit. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Stains that won’t shift
- Chips and rust in more than one place
Bath re-enamelling at your home in Pyle
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s a roll-top that’s seen better days and a coating lifting around the plughole, we can usually put it right, whatever the material.
Big or small, it’s backed by a one-year guarantee.
- Location
- Pyle (SA3)
- Area hub
- Swansea
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a full day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Have a window or extractor fan available
- Let the surface dry out before the visit
- Let us know if it has been repaired before
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Where we work around Pyle
Pyle is about 6 miles south-west of Swansea, in Swansea. From the centre of Pyle to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 153 towns and villages in Swansea.
We work across the SA3 postcode area and the streets around it. We regularly work on streets such as Headland Road, Headland Close and Brandy Cove Road and the roads around them. We also travel to Bishopston (1 mile north), Murton (1 mile north-east), Caswell (1 mile south-east), Manselfield (1 mile north-east) and Kittle (1 mile north-west). Within a short drive, we also cover Swansea (6 miles north-east), Castle (6 miles north-east), Morriston (8 miles north-east), Mount Pleasant (5 miles north-east), Gorseinon (6 miles north) and Dyfaty (6 miles north-east).
Near you in Pyle
Around Pyle, we work in homes near Church of St Teilo, Plough & Harrow pub and Bishopston Comprehensive School. A little further out are Bishopston Old Castle (1.1 miles north) and Egypt Centre - Swansea University (3.8 miles north-east). Open spaces near Pyle include Pwlldu Head and Bishop's Wood.
Work for landlords and builders
Landlords, letting agents and housing providers in Pyle use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Also near Pyle
What else we do in Pyle
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- Unusual colours or finishes
- The material and finish
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- Any details about the material
- A clear, close picture of the problem area
- One picture of the whole bath
- The postcode, so we can plan the visit
Upload a photo of the damage and a wider shot of the whole item, and tell us you are in Pyle, and we’ll reply with a fixed price.
Repair or replace in Pyle?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, and the bath can be used the day after. Prices start from £350. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with no extras added later.
Why book with us
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- Most jobs done in one visit
See our prices page and resurfacing vs replacement cost guide.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Get any chip repaired quickly
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
Dry the bath after use if possible, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Your questions about bath re-enamelling in Pyle
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- Plumbing leaks, which need a plumber
- A bath that is rusted through
- A metal bath with a through crack
Send us photos and we’ll tell you honestly before you book.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
