Warwickshire · England
Bath Re-enamelling for Marlcliff homes
Full bath re-enamelling and resurfacing for homes and businesses in Marlcliff and across Warwickshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Bath re-enamelling in Marlcliff, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We work on pressed steel baths, basins & shower trays and acrylic baths, and people most frequently call us about chips and rust in more than one place and stains that won’t shift.
Every repair comes with a one-year guarantee.
- Location
- Marlcliff (B50)
- Region
- Warwickshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Tell us about parking, stairs or access
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Signs you need bath re-enamelling in Marlcliff
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Most people get in touch when they notice something like this:
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
What to look for in a quote
- Whether the colour is mixed to match
- Who turns up on the day
- How long it needs to cure
- A fixed quote, and whether VAT is included
Towns and villages near Marlcliff
What else we do in Marlcliff
Why repair rather than replace?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why book with us
- Free fixed quotes from pictures
- We leave the room as we found it
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
Take a look at our pricing or bath cost comparison.
Our work in Marlcliff
Marlcliff is about 6 miles north-east of Evesham, in Warwickshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Marlcliff is one of 324 places in Warwickshire we cover. Our jobs stretch from Marlcliff to Birmingham (22 miles away).
We cover every part of B50 and the streets around it. We regularly work on streets such as The Bank, Cleeve Road and Bickmarsh Lane. Neighbouring places we cover include Bickmarsh (1 mile south-east), Barton (1 mile north-east), Cleeve Prior (1 mile south-west), Bidford-on-Avon (1 mile north) and Salford Priors (2 miles west). Larger places within reach include Warwick (15 miles north-east), Stratford-upon-Avon (7 miles north-east), Alcester (5 miles north), Shipston-on-Stour (12 miles south-east), Wellesbourne (11 miles east) and Studley (8 miles north).
Landmarks near Marlcliff
In Marlcliff, that means homes near Church of St Laurence, The Bulls Head pub and Bidford-on-Avon CofE Primary School and the streets around them. Marlcliff’s nearest station is Honeybourne station, roughly 3.7 miles south. Open spaces near Marlcliff include Greenhill and River Arrow Nature Reserve.
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Acrylic that moves when you stand in it
- A bath split right through the body
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Marlcliff
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Questions from Marlcliff
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Is a repair better than a new one?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How do I get a price for bath re-enamelling in Marlcliff?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.
What affects the price in Marlcliff
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- The material and finish
- How many items we do on one visit
Our prices are the same across the UK, with no extra for Marlcliff. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Most quotes are done from pictures alone. To help us price it:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Use washing-up liquid and a soft cloth
- Do not leave a chip unrepaired
- Fix dripping taps quickly
- Don’t let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
