Staffordshire · England
Bath re-enamelling & resurfacing in Marston, Staffordshire
Bath re-enamelling across Marston and nearby, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
About our bath re-enamelling in Marston
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We regularly repair Victorian roll-tops, pressed steel baths and basins & shower trays, and the jobs we see most are an original cast iron bath that needs restoring and an outdated colour you’d like to change.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Marston (ST20)
- Region
- Staffordshire
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What we can’t put right
A repair is not right for every job, including:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- Leaks from fittings rather than the bath
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Marston
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Acrylic baths
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Read more
What bath re-enamelling costs
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- The material and finish
- How hard the colour is to match
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
We price nearly every job from photos. This is what we need:
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Your postcode, so we can check dates
- Something in shot to show the size
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Nearby places to Marston
Other services in Marston
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why us?
- A year’s guarantee on all work
- We leave the room as we found it
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
Take a look at our full price list or bath cost comparison.
Questions from Marston
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
What areas do you cover?
Across the UK, and that includes Marston. Prices don’t change with location.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What happens after I send pictures?
We come back with a fixed quote, plus dates. There is no obligation to book.
Do the materials smell?
There may be a mild smell during the work that clears as it cures.
About Marston
Marston is about 6 miles west of Penkridge, in Staffordshire. Whether you are in the middle of Marston or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Marston is one of 512 places in Staffordshire we cover. Our nearest city page is Birmingham, about 23 miles away.
Postcode districts we cover here: ST20. If you are just outside Marston, we cover Wheaton Aston (1 mile south-east), Blymhill (2 miles south-west), Church Eaton (2 miles north), Bromstead (3 miles north-west) and Moreton (3 miles north-west). Larger places within reach include Stafford (8 miles north-east), Cannock (10 miles east), Rugeley (13 miles east), Burntwood (14 miles east), Stone (13 miles north) and Hednesford (10 miles east).
Landmarks near Marston
We visit homes around St Mary's CofE (C) First School, among other places. Nearby you will also find RAF Hospital Cosford (5.3 miles south) and Tong Castle (4.7 miles south-west). The countryside around Marston includes White Sitch.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Keeping it looking good
How the surface is treated afterwards matters:
- Stick to gentle, non-abrasive cleaners
- Do not leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Landlord and trade work in Marston
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
