Telford and Wrekin · England
Bath re-enamelling & resurfacing in Moreton, Telford and Wrekin
Bath re-enamelling across Moreton and nearby, generally in one visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
Bath re-enamelling at your home in Moreton
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Our technicians work on acrylic baths, Victorian roll-tops and cast iron baths, and the jobs we see most are several chips and rust patches and wear marks under the taps.
Big or small, it’s backed by a one-year guarantee.
- Location
- Moreton (TF10)
- County
- Telford and Wrekin
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Moreton
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- What the surface is made of
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- How easy the damage is to reach
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- One sharp close-up of the damage
- A wider photo showing the whole bath
If you are in Moreton and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Our work in Moreton
Moreton is about 3 miles east of Newport, in Telford and Wrekin. We travel to customers in Moreton and the surrounding area, so there is no workshop to go to. Moreton is one of 79 places in Telford and Wrekin we cover. We work right across the region, from Moreton to Birmingham (26 miles away).
We cover every part of the TF10 postcode area. We regularly work on streets such as Post Office Lane, Church Eaton Road and Church Lane and the roads around them. We also travel to Bromstead (1 mile south-east), Bromstead Heath (1 mile north-east), Beffcote (1 mile north), Coton End (2 miles north-east) and Coton (2 miles north-east). Within a short drive, we also cover Telford (8 miles south-west), Wellington (10 miles west), Dawley (9 miles south-west), Oakengates (7 miles south-west), Newport (3 miles west) and The Rock (9 miles south-west).
Around Moreton
Locally, our jobs take us to homes close to St Mary. Nearby you’ll also find Aqualate Castle (2.4 miles north-west). Green spaces nearby include Aqualate Mere and Loynton Moss.
For landlords and businesses
For anyone letting property in or around Moreton, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Aftercare tips
To keep it looking its best:
- Don’t let dyes or oils sit on the finish
- Store bottles off the bath
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
Wipe the bath dry after use where you can, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes a full day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
- Open a window if you can
How to get a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.
Read more
Moreton: your questions answered
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Nearby places to Moreton
More services for Moreton
Repairing versus replacing in Moreton
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Why book with us
- We come to you, anywhere in the UK
- Honest advice, even when it means no job
- Colour-matched on site
- Everything repaired in place
Take a look at our prices page and guide to resurfacing and replacement costs.
Honest limits
A repair is not always the answer, and we’ll tell you before we start. Repairs will not solve:
- A bath that is rusted through
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Send us photos and we will tell you honestly before booking.
Materials we work on in Moreton
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Common problems we fix in Moreton
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Look out for any of the following:
- An outdated colour you’d like to change
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Before booking anyone
- Whether a trained technician does the job
- What prep work is covered
- What happens if they find more damage
- What aftercare is recommended
About our accreditations · Every repair comes with a one-year guarantee.
