Telford and Wrekin · England
Bath Re-enamelling for Bromstead Heath homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Bromstead Heath. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Thin, worn enamel in places
Do you need bath re-enamelling in Bromstead Heath?
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
Customers usually contact us about:
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
- Worn patches where water runs and sits
Before booking anyone
- What the guarantee covers, and for how long
- Who will actually do the work
- Whether they match the colour on site
- How your room will be protected
About our bath re-enamelling in Bromstead Heath
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our repair technicians work on cast iron baths, acrylic baths and Victorian roll-tops, and people most frequently call us about thin, worn enamel in places and a dull, rough surface that won’t come clean.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Bromstead Heath (TF10)
- Area hub
- Telford and Wrekin
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What else we do in Bromstead Heath
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the next day.
Before we arrive
- Let us know if it has been repaired before
- Point us to the nearest place to park
- Clear toiletries, mats and anything else from around the area
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
When a repair is not the answer
It helps to know what we cannot do:
- Steel that has corroded right through
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
Send us photos and we will tell you honestly.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Landlord and trade work in Bromstead Heath
We work for landlords, letting agents and housing providers in Bromstead Heath as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.
Keeping it looking good
Aftercare is simple:
- Don’t let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- A year’s guarantee on all work
- Nothing taken out or refitted
- Most jobs done in one visit
- Straight answers about what a repair can do
Read our pricing and bath cost comparison.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Where we work around Bromstead Heath
Bromstead Heath is about 4 miles east of Newport, in Telford and Wrekin. We visit clients in Bromstead Heath and nearby villages, so nothing has to leave your home. We cover 79 places in Telford and Wrekin. Our nearest city page is Birmingham, about 26 miles away.
All of TF10 is within our area, from the main roads to the quietest streets. Nearby, we also work in Moreton (1 mile south-west), Bromstead (1 mile south), Beffcote (1 mile north), Coton End (1 mile north-east) and Coton (2 miles north-east). Within a short drive, we also cover Telford (8 miles south-west), Wellington (10 miles south-west), Dawley (10 miles south-west), Oakengates (8 miles south-west), Newport (4 miles west) and The Rock (9 miles south-west).
What’s near Bromstead Heath
Our customers here include homes close to St Mary and the streets around them. Further afield, we also cover the area around Aqualate Castle (2.4 miles north-west). Not far away are Loynton Moss and Aqualate Mere.
Bromstead Heath questions
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
What areas do you cover?
Everywhere in the UK, Bromstead Heath included. There is no extra charge for travel.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How do I get a price for bath re-enamelling in Bromstead Heath?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
How long does re-enamelling take?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Prices and what affects them
Prices start from £350. We price every job individually. The main factors are:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How much damage there is
- The colour and finish to match
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- The material, if you know it
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- One picture of the entire bath
Most clients in Bromstead Heath get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
