Staffordshire · England
Bath Re-enamelling for Church Eaton homes
Fixed-price bath re-enamelling in Church Eaton and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Steel that has corroded right through
- A cast iron or steel bath that is cracked right through
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think.
Materials we work on in Church Eaton
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Bath re-enamelling in Church Eaton, done in place
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We work on cast iron baths, acrylic baths and pressed steel baths, and people most often call us about chips and rust in more than one place and an outdated colour you’d like to change.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Where
- Church Eaton (ST20)
- County
- Staffordshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Church Eaton
Church Eaton is about 6 miles south-west of Stafford, in Staffordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Church Eaton is one of 512 places in Staffordshire where we work. Our nearest city page is Birmingham, about 24 miles away.
Jobs in ST20 work the same way as everywhere else we cover. Jobs here include addresses on High Street, Alley's Lane and Ashley Croft and the roads around them. Neighbouring places we cover include Gnosall Heath (2 miles north-west), Haughton (2 miles north-east), Coton End (2 miles north-west), Gnosall (2 miles north-west) and Marston (2 miles south). Further out, we also cover Stafford (6 miles north-east), Cannock (10 miles south-east), Rugeley (12 miles east), Burntwood (14 miles east), Stone (10 miles north) and Hednesford (10 miles east).
What’s near Church Eaton
Locally, our jobs take us to homes close to Church Eaton Endowed (VA) Primary School and Church of St Editha and the streets around them. Well-known places in the area include Stafford Castle (4.6 miles north-east). For a walk, there’s White Sitch.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Keeping it looking good
So the finish stays in good condition:
- Do not leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
- Avoid suction-cup mats
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the next day.
Getting ready for the visit
- Ensure the room can be ventilated
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Advice
Signs you need bath re-enamelling in Church Eaton
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for any of the following:
- A coating lifting around the plughole
- Thin, worn enamel in places
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
Comparing quotes
- Whether the price covers travel
- What protection goes down before work starts
- Aftercare advice
- How soon you can use it again
Repairing versus replacing in Church Eaton
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
What you get with us
- Typically one visit, start to finish
- Straight answers about what a repair can do
- One-year guarantee on every repair
- We come to you, anywhere in the UK
Take a look at our prices page or bath cost comparison.
More services for Church Eaton
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Questions from Church Eaton
Is repairing better than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Do you cover Church Eaton?
We do. We send a technician to Church Eaton for every job, with no extra charge for travel.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Do you cover the whole of Staffordshire?
Everywhere in the UK, Church Eaton included. There’s no extra charge for travel.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- The material
- Doing more than one item at once
We charge the same wherever you are, so there is no premium for Church Eaton. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your photos
You can usually get a fixed price without us visiting. To make it quick:
- A wider photo showing the whole bath
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Details of any past repairs
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
