Nottinghamshire · England
Bath Re-enamelling for Mattersey homes
Bath re-enamelling in Mattersey without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
Landlords, agents and businesses in Mattersey
For anyone letting property in or around Mattersey, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Bath re-enamelling in Mattersey without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with lots of chips and rust spots and an original cast iron bath that needs restoring, we can help, whatever the material.
Whatever the size of the job, it’s backed by a one-year guarantee in Mattersey and across Nottinghamshire.
- Location
- Mattersey (DN10)
- County
- Nottinghamshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Mattersey
What else we do in Mattersey
Mattersey and the surrounding area
Mattersey is about 5 miles north of Retford, in Nottinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 329 towns and villages in Nottinghamshire. Our jobs stretch from Mattersey to Leeds (about 37 miles away).
Jobs in DN10 work the same way as everywhere else we cover. You will find streets such as Main Street, Hall View and Retford Road. If you’re just outside Mattersey, we cover Lound (2 miles south), Clayworth (3 miles east), Sutton cum Lound (3 miles south), Tiln (3 miles south) and Barnby Moor (3 miles south-west). We also work in nearby towns such as Worksop (9 miles south-west), Retford (5 miles south), Market Warsop (15 miles south-west), New Ollerton (13 miles south), Kilton (8 miles south-west) and Creswell (14 miles south-west).
Near you in Mattersey
We visit homes around Mattersey Primary School, All Saints' Church and Mattersey Hall, among other places. Nearby you’ll also find Hospital of St Mary Magdalene (3.4 miles north-west). Green spaces nearby include Bellmoor Lake and Idle Valley Nature Reserve.
Honest limits
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Mattersey
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs right away
- Do not leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why book with us
- Same prices wherever you are
- One-year guarantee on every repair
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
Take a look at our full price list and bath cost comparison.
Prices and what affects them
Prices start from £350. We price every job individually, from your pictures. What matters most is:
- What the surface is made of
- The size and number of damaged areas
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- Details of any past repairs
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
To get a price, send a couple of photos using our quote form or ring us. We will say straight away whether it can be repaired.
The process
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for the best part of a day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Read more
Mattersey questions
Are there extra charges for Mattersey?
Travel is included in the price, and we charge the same wherever you are.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
