Staffordshire · England
Bath Re-enamelling for Meir Heath homes
Problem with your bath in Meir Heath? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
Prices and what affects them
Prices start from £350. We price every job individually. The main factors are:
- How many areas need work
- How hard the colour is to match
- What the surface is made of
- Whether we combine several jobs
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Something in shot to show the size
- Natural light rather than flash
Upload photos of the damage and one of the whole item, and tell us you’re in Meir Heath, and we’ll come back with a fixed quote.
Bath re-enamelling at your home in Meir Heath
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with brown or grey marks that don’t clean off and a period or roll-top bath worth keeping, we can normally put it right.
Every repair comes with a one-year guarantee, wherever you are in Staffordshire.
- Where
- Meir Heath (ST3)
- County
- Staffordshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What else we do in Meir Heath
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Avoid suction-cup mats
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
FAQs for Meir Heath
Which areas do you work in?
Everywhere in the UK, Meir Heath included. There is no extra charge for travel.
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Staffordshire.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you work in Meir Heath?
Yes. We cover the whole UK and come to Meir Heath and the rest of Staffordshire. Send us photos for a fixed quote, or call 0345 017 0787.
What happens after I send photos?
We come back with a fixed price, generally with dates to choose from. There’s no obligation to book.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Do you need bath re-enamelling in Meir Heath?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Most people get in touch after spotting one of these:
- A peeling or bubbling previous coating
- Several chips and rust patches
- Stains that won’t shift
- A bath that stays dull however much you clean it
Comparing quotes
- Whether the colour is mixed to match
- How soon you can use it again
- What the guarantee covers, and for how long
- A fixed price, and whether VAT is included
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
About Meir Heath
Meir Heath is about 2 miles south-east of Longton, in Staffordshire. Jobs in Meir Heath are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover 512 places in Staffordshire. Our nearest city page is Birmingham, about 35 miles away.
All of ST3 is within our area. Jobs here include addresses on Little Lane, Common Lane and Grange Road and the roads around them. We also cover the places around Meir Heath: Lightwood (1 mile north), Normacot (1 mile north-west), Hartwell (1 mile south-west), Florence (1 mile north-west) and Meir (1 mile north). Within a short drive, we also cover Stafford (11 miles south), Newcastle-under-Lyme (7 miles north-west), Stone (5 miles south), Leek (11 miles north), Biddulph (11 miles north) and Alsager (13 miles north-west).
Around Meir Heath
We visit homes around Sandon High School, Meir Heath Academy and The Windmill pub, among other places. Meir Heath’s nearest station is Blythe Bridge station, roughly 1.8 miles north-east. Further afield, we also cover the area around Beswick Museum (1.1 miles north) and North Staffordshire Royal Infirmary (5 miles north-west). Open spaces near Meir Heath include Hem Heath Woods.
What we cannot put right
We won’t take on work that won’t last, so these are the limits:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
The process
Arrival times are agreed in advance, so you are not left guessing. On site, it takes the best part of a day for most jobs. We leave the room clean.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s usually ready the day after.
Preparing for the visit
- Ensure the room can be ventilated
- Clear the area around the damage
- Tell us if there are stairs or a lift
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Related advice
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Meir Heath. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- No extra charge for your area
- Dust sheets down, tidy finish
Read our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
