Stoke-on-Trent · England
Bath re-enamelling & resurfacing in Normacot, Stoke-on-Trent
Damaged bath in Normacot? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A coloured bath you want in white
Common problems we fix in Normacot
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Common reasons people in Normacot contact us are:
- An old resurfacing that’s failing
- Wear marks under the taps
- Several chips and rust patches
- Stains that won’t shift
Questions to ask before you book
- What protection goes down before work starts
- What aftercare is recommended
- What happens if they find more damage
- If travel is included in the price
How we handle bath re-enamelling in Normacot
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. We are often asked to fix an outdated colour you’d like to change and several chips and rust patches, on pressed steel baths, Victorian roll-tops and acrylic baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Normacot (ST3)
- Region
- Stoke-on-Trent
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Normacot: your questions answered
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Stoke-on-Trent.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
What affects the price in Normacot
Prices start from £350. We price every job individually. The main factors are:
- What kind of damage it is
- Whether we combine several jobs
- Access to the area
- The size and number of damaged areas
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- Where you are, by postcode
- A clear, close picture of the problem area
- What it’s made of, if you know
- Natural light rather than flash
For a price in Normacot, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
When we would advise against a repair
Not everything can be repaired, and we would rather say so up front. We cannot fix:
- Steel that has corroded right through
- A bath split right through the body
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
- Make sure the area is dry
How to get a price
Most clients in Normacot get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Also in Normacot
Repairing versus replacing in Normacot
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Normacot. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or bath cost comparison.
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Store bottles off the bath
- Do not leave a chip unrepaired
- Don’t use the bath until it has fully cured
- Repair dripping taps early
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Normacot and nearby
Normacot is about 1 mile south-east of Longton, in Stoke-on-Trent. From the centre of Normacot to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Normacot is one of 59 towns and villages in Stoke-on-Trent where we work. We work right across the region, from Normacot to Manchester (35 miles away).
Our repair technicians cover all of ST3 and the streets around it. You will find streets such as Sandon Road, Forest Road and Watery Lane, all of which we cover. With the A5005 close by, Normacot is simple for us to get to. Other places close to Normacot include Lightwood (1 mile east), Florence (1 mile west), Meir (1 mile north-east), Dresden (1 mile north-west) and Meir Heath (1 mile south-east). Within a short drive, we also cover Stoke-on-Trent (4 miles north-west), Hanley (4 miles north-west), Burslem (6 miles north-west), Stoke-upon-Trent (4 miles north-west), Tunstall (7 miles north-west) and Smallthorne (6 miles north).
What’s near Normacot
In Normacot, that means homes near Church of the Holy Evangelists, St Augustine's Catholic Academy and Sandon High School, among other places. Normacot’s nearest station is Longton station, about 1.6 miles north-west of the centre. Other landmarks nearby include Beswick Museum (0.6 miles north-east) and North Staffordshire Royal Infirmary (4.1 miles north-west). Open spaces near Normacot include Hem Heath Woods.
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
