Cornwall · England
Bath Re-enamelling for Menheniot homes
Bath re-enamelling across Menheniot and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Dust sheets down, tidy finish
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
Read our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling at your home in Menheniot
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with thin, worn enamel in places and an old resurfacing that’s failing, we can help, on basins & shower trays, pressed steel baths and cast iron baths alike.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Menheniot (PL14)
- County
- Cornwall
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Menheniot
What else we do in Menheniot
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes most of the day. We clean up when we are done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Make sure the area is dry
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
How to get a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
- Never use suction bath mats
- Respect the curing time we give you
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Common questions in Menheniot
How much does bath re-enamelling cost in Menheniot?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you cover the whole of Cornwall?
We work UK-wide. Our prices are the same everywhere.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed price without visiting.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
When a repair isn’t the answer
We’d rather lose a job than do one that will not last, so here’s what a repair can’t put right:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Menheniot
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Where we work around Menheniot
Menheniot is about 2 miles south-east of Liskeard, in Cornwall. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Menheniot is one of 644 towns and villages in Cornwall we cover.
Jobs in PL14 work the same way as everywhere else we cover. Jobs here include addresses on Hartmeade, Trewint Road and The Rodings and the roads around them. We also travel to Lower Clicker (1 mile south), Merrymeet (2 miles north), Hendrabridge (2 miles north-west), Addington (2 miles north-west) and Liskeard (2 miles north-west). Larger places within reach include Stonehouse (12 miles south-east), Bodmin (14 miles west), Saltash (8 miles east), Launceston (14 miles north), Looe (6 miles south) and Torpoint (10 miles south-east).
Landmarks near Menheniot
Locally, our jobs take us to homes close to Menheniot Primary School and Church of St Lalluwy. For rail, the closest station is Menheniot station, about 1 mile south of the centre. A little further out are Caradon (2.6 miles west) and Liskeard and District Museum (2.6 miles west). For a walk, there’s Caradon Hill.
Landlord and trade work in Menheniot
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What affects the price in Menheniot
Prices start from £350. We price every job individually. The main factors are:
- What the surface is made of
- How hard the colour is to match
- The size and number of damaged areas
- Doing more than one item at once
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
How to get a fixed quote
Two or three clear pictures are typically enough. Try to include:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A picture taken from further back
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
