Wiltshire · England
Bath re-enamelling & resurfacing in Mere, Wiltshire
Bath re-enamelling across Mere and nearby, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Landlord and trade work in Mere
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Bath re-enamelling at your home in Mere
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the following day. Typical jobs include several chips and rust patches and thin, worn enamel in places, on cast iron baths, acrylic baths and Victorian roll-tops.
Every repair comes with a one-year guarantee, wherever you are in Wiltshire.
- Location
- Mere (BA12)
- County
- Wiltshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Mere
Mere is about 8 miles south-west of Warminster, in Wiltshire. From the centre of Mere to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover 425 places in Wiltshire, from the larger towns to small villages.
Our visits in BA12 work the same way as everywhere else we cover. You will find streets such as Water Street, Dark Lane and Hazzards Hill. With the A303 and B3095 close by, Mere is simple for us to get to. We also travel to Limpers Hill (1 mile south-east), The Middles (2 miles east), Barrow Street (2 miles south-east), Milton on Stour (3 miles south) and West Knoyle (3 miles east). Within a short drive, we also cover Westbury (12 miles north), Warminster (8 miles north-east), Tisbury (8 miles east), Boreham (9 miles north-east), North Bradley (14 miles north) and Bratton (14 miles north-east).
Near you in Mere
We visit homes around Church of St Michael the Archangel and Mere School and the streets around them. Mere’s nearest station is Gillingham (Dorset) station, roughly 3.9 miles south of the centre. Further afield, we also cover the area around Mere Museum (within half a mile west) and Castle Hill (within half a mile west). For a walk, there is White Sheet Hill.
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so these are the limits:
- A metal bath with a through crack
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Mere
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Repair dripping taps early
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Do you need bath re-enamelling in Mere?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
- An original cast iron bath that needs restoring
Before you book anyone
- Whether they match the colour on site
- Who will actually do the work
- What happens if they find more damage
- When it can be used again
Nearby places to Mere
More services for Mere
Repair or replace: which is better?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- We will tell you if it’s not worth repairing
- Colour-matched on site
- One-year guarantee on every repair
- Same prices wherever you are
Take a look at our prices page or guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Questions from Mere
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How do I get a price for bath re-enamelling in Mere?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item with your BA12 postcode.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What areas do you cover?
Everywhere in the UK, Mere included. Travel is included in the price.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which generally takes most of the day. If anything looks different from your photos, we will talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Ensure the room can be ventilated
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
