Wiltshire · England
Bath Re-enamelling in Limpers Hill
Bath re-enamelling in Limpers Hill without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Our work in Limpers Hill
Limpers Hill is about 9 miles south of Warminster, in Wiltshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 425 places across Wiltshire.
We cover every part of BA12. We also cover the places around Limpers Hill: Mere (1 mile north-west), Barrow Street (1 mile south-east), The Middles (1 mile east), West Knoyle (2 miles east) and Milton on Stour (2 miles south-west). Larger places within reach include Westbury (12 miles north), Warminster (9 miles north), Tisbury (7 miles east), Boreham (9 miles north-east), North Bradley (15 miles north) and Bratton (14 miles north-east).
Landmarks near Limpers Hill
Typical jobs here are in homes near Mere School and Church of St Matthew. For rail, the closest station is Gillingham (Dorset) station, roughly 3.6 miles south. Other landmarks nearby include Westminster Memorial Hospital (5.9 miles south) and Castle Hill (1.1 miles north-west). Green spaces nearby include White Sheet Hill.
Bath re-enamelling in Limpers Hill without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. We work on basins & shower trays, cast iron baths and pressed steel baths, and common reasons people contact us are an outdated colour you’d like to change and lots of chips and rust spots.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Limpers Hill (BA12)
- Area hub
- Wiltshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
A repair isn’t right for every job, including:
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Leave the bath for the full curing time before using it
- Store bottles off the bath
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
Places near Limpers Hill
More services for Limpers Hill
How it works
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes the best part of a day. At the end we talk you through how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Make sure the area is dry
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Advice
Questions from Limpers Hill
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How do I book?
Use the quote form or ring 0345 017 0787.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- The material and finish
- Access to the area
- Any earlier repairs that need removing first
- Unusual colours or finishes
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book.
Getting a price from photos
When you take your photos, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A clear, close picture of the problem area
- A wider photo showing the entire bath
If you’re in Limpers Hill and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
What we’re called out for in Limpers Hill
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Clients normally contact us about:
- A bath in a colour that no longer suits
- Wear marks under the taps
- Staining under the taps and around the waste
- An old resurfacing that’s failing
What your quote should include
- What prep work is covered
- Who will actually do the work
- How your room will be protected
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
