Staffordshire · England
Bath Re-enamelling for Millend homes
Full bath re-enamelling and resurfacing in Millend, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Staining under the taps and around the waste
About our bath re-enamelling in Millend
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on Victorian roll-tops, pressed steel baths and basins & shower trays, and the jobs we see most are a peeling or bubbling previous coating and a coloured bath you want in white.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Millend (ST7)
- County
- Staffordshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day, and we’ll tell you if anything changes.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- How many areas need work
- What the surface is made of
- The type of damage
- Whether we combine several jobs
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Getting a price from photos
Two or three clear photos are typically enough. Try to include:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Landlords, agents and businesses in Millend
For anyone letting property in or around Millend, we will quote for several properties at once. Just send pictures for each address and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Millend and nearby
Millend is about 2 miles south of Alsager, in Staffordshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. Millend is one of 512 places in Staffordshire where we work. We work right across the region, from Millend to Manchester (29 miles away).
We cover every part of the ST7 postcode area and the streets around it. Nearby, we also work in Park End (1 mile south-west), Audley (1 mile south), Barthomley (1 mile west), Radway Green (2 miles north-west) and Halmer End (2 miles south). Further out, we also cover Newcastle-under-Lyme (5 miles south-east), Longton (9 miles south-east), Stone (14 miles south-east), Leek (12 miles east), Biddulph (7 miles north-east) and Kidsgrove (3 miles north-east).
Local landmarks in Millend
Our customers here include homes close to Boughey Arms, Sir Thomas Boughey High School and Church of St James, among other places. For rail, the closest station is Alsager station, about 1.8 miles north of the centre. Other landmarks nearby include Heighley Castle (3.7 miles south) and Audley and Bignall End (1.6 miles south-east). For a walk, there’s Parrot's Drumble and Westport Lake.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Millend questions
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
When we would advise against a repair
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that is cracked right through
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Places near Millend
Also in Millend
Aftercare tips
After the repair has cured, a few habits help it last:
- Don’t leave a chip unrepaired
- Do not leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
- Clean with a soft cloth and mild detergent
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Why repair rather than replace?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. The price reflects the work involved, not where you live. The full price is agreed before booking.
Why us?
- Generally one visit, start to finish
- We will tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- Work done at your home or business
Take a look at our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
