Staffordshire · England
Bath re-enamelling & resurfacing in Park End, Staffordshire
Problem with your bath in Park End? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits

Repairing versus replacing in Park End
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Same prices wherever you are
- Everything repaired in place
- Colour mixed on the day to match
- One-year guarantee on every repair
Take a look at our prices page and resurfacing vs replacement cost guide.
Bath re-enamelling at your home in Park End
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Whether it’s a coating lifting around the plughole and a bath that stays dull however much you clean it, we can usually put it right, on basins & shower trays, pressed steel baths and acrylic baths alike.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Park End (ST7)
- Region
- Staffordshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026

Also near Park End
What else we do in Park End
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Park End as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
DIY kit or professional repair?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Park End and the surrounding area
Park End is about 2 miles south of Alsager, in Staffordshire. From the centre of Park End to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 512 places across Staffordshire. We work right across the region, from Park End to Manchester (about 29 miles away).
We cover every part of the ST7 postcode area. We also cover the places around Park End: Millend (1 mile north-east), Audley (1 mile south-east), Barthomley (1 mile north-west), Balterley Green (2 miles west) and Balterley (2 miles south-west). Larger places within reach include Newcastle-under-Lyme (5 miles south-east), Longton (9 miles south-east), Stone (13 miles south-east), Leek (12 miles east), Biddulph (7 miles north-east) and Kidsgrove (4 miles north-east).
Near you in Park End
Locally, our jobs take us to homes close to Sir Thomas Boughey High School, Church of St James and Boughey Arms. The nearest railway station is Alsager station, about 2.3 miles north. Well-known places in the area include Bradwell Hospital (3.7 miles south-east) and Englesea Brook Chapel and Museum of Primitive Methodism (2.2 miles west). For a walk, there is Westport Lake and Parrot's Drumble.
- Local facilities include Audley and Bignall End (1.7 miles south-east)
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- Access to the area
- Doing more than one item at once
- Unusual colours or finishes
- The size and number of damaged areas
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- Natural light rather than flash
- One picture of the whole bath
- Any earlier repairs or coatings
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
What we can’t put right
We won’t take on work that will not last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
The process
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. Allow a full day, and we will keep you posted as we go.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Getting a price
Send us pictures of the damage and a wider shot of the whole item, with your ST7 postcode, and we will reply with a fixed quote.
Related advice
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Respect the curing time we give you
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Park End questions
Will the bath be moved?
Not at all. We work on the bath in place, with the room masked and ventilated.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
Will the new finish last?
Care for it and it lasts. Gentle cleaning, no suction mats.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
What happens after I send photos?
We come back with a fixed price. You’re under no obligation.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Will there be a smell?
There may be a mild smell during the work, which fades afterwards.
About our accreditations · Every repair comes with a one-year guarantee.

