North Ayrshire · Scotland
Bath Re-enamelling for Seamill homes
Full bath re-enamelling and resurfacing for homes and businesses in Seamill and across North Ayrshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A coloured bath you want in white
- Stains that won’t shift
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a full day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Open a window if you can
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
Get a quote
For a price in Seamill, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
About our bath re-enamelling in Seamill
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on cast iron baths, acrylic baths and pressed steel baths, and common reasons people contact us are staining under the taps and around the waste and enamel that’s lost its shine and feels rough.
You get a one-year guarantee, the same in Seamill as everywhere else we work.
- Location
- Seamill (KA23)
- Area hub
- North Ayrshire
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- A fixed quote before booking
- We leave the room as we found it
- Everything repaired in place
- Normally one visit, start to finish
See our prices page and bath cost comparison.
Honest limits
We will always be straight with you, so here’s what a repair will not do:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
If in doubt, send photos and we’ll say what we think.
Materials we work on in Seamill
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- How easy the damage is to reach
- How much damage there is
- Unusual colours or finishes
- The material and finish
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- A coin beside the damage so we can judge size
- The material, if you know it
- A picture taken from further back
- Whether it’s been repaired or coated before
The quickest way to a price is to send a couple of pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Common problems we fix in Seamill
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Common reasons people in Seamill contact us are:
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
- A coloured bath you want in white
- Worn patches where water runs and sits
Comparing quotes
- What happens if they find more damage
- The length of the guarantee and what it covers
- Whether the price covers travel
- How the colour is matched
Common questions in Seamill
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
I rent my home. Can I book you?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Is my repair covered?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Nearby places to Seamill
More services for Seamill
Landlords, agents and businesses in Seamill
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Covering Seamill
Seamill is about 3 miles north-west of Ardrossan, in North Ayrshire. Across the KA23 area, we come to you. Our technicians cover all 53 towns and villages in North Ayrshire, from the larger towns to small villages. Our jobs stretch from Seamill to Glasgow (about 26 miles away).
Postcode districts we cover here: KA23. That includes homes on Sandy Road, Maimhor Road and Hyndman Road and the roads around them. We also cover the places around Seamill: West Kilbride (1 mile north-east), Ardrossan (3 miles south-east), Saltcoats (4 miles south-east), Auchenharvie (5 miles south-east) and Fairlie (5 miles north). Further out, we also cover Irvine (10 miles south-east), Kilwinning (7 miles east), Largs (8 miles north), Stevenston (5 miles south-east), Kilbirnie (8 miles north-east) and Girdle Toll (9 miles south-east).
Landmarks near Seamill
We visit homes around Barony Parish Church and the streets around them. For rail, the closest station is West Kilbride station, roughly 1.1 miles north-east. Nearby you’ll also find West Kilbride Museum (0.8 miles north) and Lady Margaret Hospital (5.8 miles north). Green spaces nearby include Law Hill.
How to care for the repair
Simple care helps the repair last. Our advice:
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
- Store bottles off the bath
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our accreditations · Every repair comes with a one-year guarantee.
