Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Mollington, Cheshire West and Chester
Bath re-enamelling in Mollington without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
What bath re-enamelling costs
Prices start from £350. We price every job individually, from your photos. The main factors are:
- Previous DIY repairs that have to come out
- Access to the area
- The material and finish
- Unusual colours or finishes
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
You can generally get a fixed quote without us visiting. To make it quick:
- Any details about the material
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Your postcode, so we can check dates
Most clients in Mollington get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Bath re-enamelling in Mollington without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. It avoids removal, plumbing and re-tiling. Common call-outs are for lots of chips and rust spots and brown or grey marks that don’t clean off, across pressed steel baths, basins & shower trays and cast iron baths.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Mollington (CH1)
- Region
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Also near Mollington
What else we do in Mollington
What a repair can’t fix
We would rather lose a job than do one that will not last, so these are the limits:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Holes rusted through the metal
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
What happens on the day
We turn up at the time we agreed with you and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Open a window if you can
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Related advice
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
For landlords and businesses
Landlords, letting agents and housing providers in Mollington use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Housing associations and facilities teams use us for planned and reactive repairs in Cheshire West and Chester and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Mollington and the surrounding area
Mollington is about 3 miles north-west of Chester, in Cheshire West and Chester. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Mollington is one of 224 places in Cheshire West and Chester where we work. You can also see our page for Liverpool, about 12 miles away.
Our repair technicians cover all of the CH1 postcode area and the streets around it. Local streets include Mollington Court, Willow Lea and Well Lane, and we cover them all. Other places close to Mollington include Lea by Backford (1 mile north-east), Backford (1 mile north-east), Saughall (1 mile west), Blacon (2 miles south) and Strawberry Park (2 miles north). We also work in nearby towns such as Chester (3 miles south-east), Ellesmere Port (3 miles north), Neston (7 miles north-west), Boughton (3 miles south-east), Frodsham (10 miles north-east) and Hoole (3 miles south-east).
Local landmarks in Mollington
Typical jobs here are in homes near St Oswald's Church, Blacon High School and St Oswald's CofE Aided Primary School and the streets around them. For rail, the closest station is Bache station, about 1.9 miles south-east of the centre. Other landmarks nearby include Cheshire Oaks Designer Outlet (3 miles north-east) and Countess of Chester Hospital (1.7 miles south-east). Not far away are Shotwick Lake and Gowy Meadows Nature Reserve.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Signs you need bath re-enamelling in Mollington
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
People generally call us when they notice one of these:
- A bath in a colour that no longer suits
- A roll-top that is seen better days
- Stains that won’t shift
- Wear marks under the taps
What to look for in a quote
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
- Who turns up on the day
- Whether they match the colour on site
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Your questions about bath re-enamelling in Mollington
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
What happens once I’ve sent pictures?
We review the photos and send a fixed quote with dates.
Are there extra charges for Mollington?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
About our accreditations · Every repair comes with a one-year guarantee.
