Cheshire West and Chester · England
Bath Re-enamelling in Blacon
Local bath re-enamelling for Blacon: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Bath re-enamelling in Blacon, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. We are frequently asked to fix enamel that’s lost its shine and feels rough and lots of chips and rust spots, across cast iron baths, basins & shower trays and Victorian roll-tops.
We stand behind the work with a one-year guarantee.
- Where
- Blacon (CH1)
- County
- Cheshire West and Chester
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Blacon
Also in Blacon
Common problems we fix in Blacon
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
Send us a photo if you notice any of these:
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
Comparing quotes
- If travel is included in the price
- How soon you can use it again
- Whether they match the colour on site
- How your room will be protected
Your questions about bath re-enamelling in Blacon
What happens if you find more damage?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you cover Blacon?
Yes, we do. Technicians travel to Blacon from across the region, with no extra charge for travel.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What areas do you cover?
All of Cheshire West and Chester, and the rest of the UK. There is no extra charge for travel.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How to look after the repair
So the finish stays in good condition:
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Don’t leave a chip unrepaired
- Use washing-up liquid and a soft cloth
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
About Blacon
Blacon is about 2 miles north-west of Chester, in Cheshire West and Chester. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Our technicians cover 224 places in Cheshire West and Chester, from the larger towns to small villages. You can also see our page for Liverpool, about 14 miles away.
We work across the CH1 postcode area and the streets around it. From Furne Road, Onslow Road and Fowler Road or a nearby road, we can come to you. We also travel to Mollington (2 miles north), Saughall (2 miles north-west), Sealand (2 miles west), Lea by Backford (2 miles north) and Backford (3 miles north-east). Further out, we also cover Ellesmere Port (5 miles north), Neston (8 miles north-west), Frodsham (11 miles north-east), Hoole (3 miles east), Whitby (5 miles north) and Strawberry Park (4 miles north).
What’s near Blacon
Typical jobs here are in homes near The Arches Community Primary School, Commercial School and Blacon High School. Other local landmarks include Holy Trinity Church (under half a mile north) and Saughall Arms (0.8 miles north-west). The nearest railway station is Bache station, roughly 1.5 miles east. A little further out are Broughton Shopping Park (3.2 miles south-west) and Chester Castle (part) (2 miles south-east).
- Parks and local facilities nearby include Chester (2.4 miles south-east)
What affects the price in Blacon
Resurfacing from £350. You will not pay by the hour. The price is based on:
- Whether we combine several jobs
- How much damage there is
- What the surface is made of
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Getting a price from photos
Photographing the damage takes a minute. Please include:
- A close-up of the damage, in focus
- What it’s made of, if you know
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
Email us photos of the damage and a wider shot of the entire item, and tell us you’re in Blacon, and we will come back with a fixed quote.
How it works
Here’s how a visit normally runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Clear the area around the damage
- Let the surface dry out before the visit
- Let us know which floor the room is on
Get a quote
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
