Medway · England

Bath re-enamelling & resurfacing in Moor Street, Medway

Damaged bath in Moor Street? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Moor Street

Should I try a DIY kit first?

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

Bath re-enamelling in Moor Street, done in place

We don’t move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. We are frequently asked to fix stains that won’t shift and a coating lifting around the plughole, in cast iron baths, pressed steel baths and basins & shower trays.

Every job is backed for twelve months in Moor Street and everywhere else. We return to put right any problem with the work.

Basin with yellowed glaze resurfaced to a clean white finish
Area
Moor Street (ME8)
Area hub
Medway
Guarantee
One year on every repair
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

Resurfacing from £350. Every quote is fixed and free. What we look at:

  • Unusual colours or finishes
  • Access to the area
  • The material and finish
  • How many areas need work

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

How to get a fixed quote

Good pictures mean an accurate price. Here’s what we find most useful:

  • A picture taken from further back
  • Whether it’s been repaired or coated before
  • Good light, ideally daylight, without flash glare
  • Where you are, by postcode

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.

Landlord and trade work in Moor Street

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

For anyone letting property in or around Moor Street, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.

Common questions in Moor Street

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

Can you repair something that is been repaired before?

Yes, regularly. It can add a little time, which we include in the quote.

What information do you need?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.

Will there be fumes?

There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.

Can you quote from pictures?

Nearly always. We only ask to see it in person if the photos can’t show what we need.

Are there extra charges for Moor Street?

Travel is included in the price, and we charge the same wherever you are.

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair won’t do:

  • A bath that’s rusted through
  • Problems we can’t see until an old finish comes off
  • A cast iron or steel bath that’s cracked right through

If in doubt, send photos and we’ll say what we think.

Materials we work on in Moor Street

  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Acrylic baths

Looking after it afterwards

Nothing complicated is needed:

  • Wipe the bath dry after use in hard water areas
  • Wash away dyes and oils after use
  • Stick to gentle, non-abrasive cleaners
  • Keep suction mats out of the bath

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.

Why repair rather than replace?

If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • We come to you, anywhere in the UK
  • No extra charge for your area
  • Most jobs done in one visit
  • CHAS and Constructionline accredited

Read our full price list or bath cost comparison.

How it works

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a full day, and we leave the room as we found it.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Preparing for the visit

  • Point us to the nearest place to park
  • Mention if the room is upstairs or in a flat
  • Clear toiletries, mats and anything else from around the area

Getting a price

Send us pictures of the damage and one of the entire item, and tell us you are in Moor Street, and we’ll come back with a fixed quote.

Get a fixed price

Advice

Our work in Moor Street

Moor Street is about 2 miles east of Gillingham, in Medway. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover all 68 towns and villages in Medway. We work right across the region, from Moor Street to London (about 33 miles away).

We cover every part of the ME8 postcode area. Streets in the area include Seymour Road, Horseman's Green Road and South Bush Lane, all of which we cover. Other places close to Moor Street include Rainham (1 mile west), Hartlip (1 mile south-east), Meresborough (1 mile south-west), Breach (1 mile east) and Lower Hartlip (1 mile south-east). We also work in nearby towns such as Chatham (4 miles west), Rochester (6 miles west), Strood (7 miles west), Luton (4 miles west), Lordswood (4 miles south-west) and Hoo St Werburgh (5 miles north-west).

Local landmarks in Moor Street

Locally, our jobs take us to homes close to Berengrave Chalk Pit, Church of St Margaret and The Railway pub. Also close by are Riverside Primary School (0.5 miles north-west) and Leigh Academy Rainham (under half a mile north-west). Moor Street’s nearest station is Rainham (Kent) station, about 0.8 miles north-west of the centre. Nearby you’ll also find Medway Maritime Hospital (4 miles west). Open spaces near Moor Street include Bishop Saltings and Detling Hill.

Map of Moor Street © OpenStreetMap contributors

When to call us in Moor Street

Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.

Keep an eye out for these signs:

  • A coating lifting around the plughole
  • An outdated colour you’d like to change
  • Brown or grey marks that don’t clean off
  • Worn patches where water runs and sits

Before booking anyone

  • Whether there are any call-out or travel charges
  • How the room is protected while they work
  • The length of the guarantee and what it covers
  • How changes to the job are handled

Choosing a repair company

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.