Dorset · England
Bath re-enamelling & resurfacing in Moreton, Dorset
Problem with your bath in Moreton? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Aftercare tips
Nothing complicated is needed:
- Wipe the bath dry after use in hard water areas
- Never use suction bath mats
- Fix dripping taps quickly
- Wash away dyes and oils after use
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
About our bath re-enamelling in Moreton
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. We work on acrylic baths, basins & shower trays and pressed steel baths, and people most often call us about chips and rust in more than one place and enamel that’s lost its shine and feels rough.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back.
- Location
- Moreton (DT2)
- Region
- Dorset
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- Doing more than one item at once
- The type of damage
- Whether old repairs or coatings need taking off
- Access to the area
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Phone pictures are fine, there is no need for anything special. Ensure they show:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- Whether it’s been repaired or coated before
- A photo taken from further back
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will say straight away whether it can be repaired.
Also near Moreton
Other services in Moreton
About Moreton
Moreton is about 7 miles east of Dorchester, in Dorset. Whether you’re in the middle of Moreton or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in 462 places across Dorset, from the larger towns to small villages.
All of DT2 is within our area. Local streets include The Street, Hurst Road and The Common, and we cover them all. We also travel to Briantspuddle (2 miles north), Affpuddle (3 miles north), Throop (3 miles north-east), Tolpuddle (3 miles north) and Warren (3 miles north-east). Within a short drive, we also cover Weymouth (10 miles south-west), Dorchester (7 miles west), Wimborne Minster (15 miles north-east), Blandford Forum (12 miles north-east), Broadstone (13 miles east) and Corfe Mullen (12 miles east).
Near you in Moreton
Typical jobs here are in homes near St Nicholas Church, among other places. Moreton’s nearest station is Moreton (Dorset) station, roughly 1.5 miles west of the centre. Nearby you will also find Tolpuddle Martyrs Museum (3.3 miles north). For a walk, there is Black Hill and Tadnoll and Winfrith Heath.
What a repair can’t fix
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- Steel that has corroded right through
Send us photos and we will tell you honestly before booking.
Materials we work on in Moreton
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
Do you need bath re-enamelling in Moreton?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
Comparing quotes
- Whether the price covers travel
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- How soon you can use it again
Should you replace it?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why book with us
- CHAS and Constructionline accredited
- A year’s guarantee on all work
- We will tell you if it’s not worth repairing
- Colour-matched on site
Take a look at our full price list and guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Moreton
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What areas do you cover?
Across the UK, so Moreton is covered. Our prices are the same everywhere.
Do you cover Moreton?
Yes, we do. Technicians travel to Moreton from across the region, and the price is the same as everywhere else.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
Before we arrive
- Clear the area around the damage
- Make sure the area is dry
- Tell us about parking, stairs or access
Get a quote
If you’re in Moreton and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
