West Lothian · Scotland
Bath re-enamelling & resurfacing in Mossend, West Lothian
Full bath re-enamelling and resurfacing at your home in Mossend, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
Why repair rather than replace?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Technicians who travel to you, UK-wide
- One-year guarantee on every repair
- Colour mixed on the day to match
- One visit for most repairs
Take a look at our pricing and resurfacing vs replacement cost guide.
Bath re-enamelling at your home in Mossend
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. We’re often asked to fix enamel that’s lost its shine and feels rough and a coating lifting around the plughole, across cast iron baths, pressed steel baths and acrylic baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Area
- Mossend (EH55)
- County
- West Lothian
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around Mossend
Mossend is about 3 miles south-west of Livingston, in West Lothian. Our technicians come to homes and businesses in Mossend and the surrounding area, so nothing has to leave your home. We work in 58 places in West Lothian, from the larger towns to small villages. Our nearest city page is Edinburgh, about 15 miles away.
All of EH55 is within our area, from the main roads to the quietest streets. Whether you live on Mossend Place, Mossend Gardens and Mossend Park or a nearby road, we can come to you. If you’re just outside Mossend, we cover West Calder (1 mile south), Polbeth (1 mile east), Seafield (2 miles north-west), Bellsquarry (2 miles north-east) and Adambrae (2 miles north-east). Larger places within reach include Livingston (3 miles north-east), Bathgate (4 miles north-west), Linlithgow (8 miles north), Whitburn (4 miles west), East Calder (5 miles north-east) and Broxburn (6 miles north-east).
Landmarks near Mossend
Around Mossend, we work in homes near West Calder and the streets around them. Mossend has its own railway station: West Calder station. Well-known places in the area include St John's Hospital (3.1 miles north-east) and Bathgate Castle (3.4 miles north-west). Not far away are Dechmont Law.
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before you book. We take into account:
- The material
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Previous DIY repairs that have to come out
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
It only takes a minute to photograph the damage. Try to send:
- Details of any past repairs
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Nearby places to Mossend
What else we do in Mossend
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Rinse off hair dye, oils and bath bombs right away
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Do not leave a chip unrepaired
Dry the bath after use if possible, particularly with hard water, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take most of the day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
- Point us to the nearest place to park
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Related advice
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Your questions about bath re-enamelling in Mossend
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you resurface freestanding baths?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How much does bath re-enamelling cost in Mossend?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How long does re-enamelling take?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
What a repair can’t fix
Some jobs are not right for a repair, for example:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Mossend
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Landlord and trade work in Mossend
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Landlords, letting agents and housing providers in Mossend use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
