Flintshire · England

Bath Re-enamelling in Mostyn

Local bath re-enamelling for Mostyn: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Several chips and rust patches
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Mostyn

Bath re-enamelling at your home in Mostyn

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We work on pressed steel baths, cast iron baths and basins & shower trays, and common reasons people get in touch are wear marks under the taps and a dull, rough surface that won’t come clean.

Your repair is guaranteed for a year, as with every job we do.

Where
Mostyn (CH8)
County
Flintshire
Warranty
One year on every repair
Quote
From £350. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

What we do, step by step

We work cleanly and quietly. We protect the area first, then the job itself takes a full day. Before we leave, we explain the curing time and the aftercare.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on
  • Have somewhere for us to park nearby if possible

How to get a price

To get a price, send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.

Get a free quote

Advice

What a repair cannot fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Anything hidden under an old coating, until we remove it
  • A bath that is rusted through
  • Leaking taps or wastes (a plumber’s job)

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
  • Victorian roll-tops
  • Cast iron baths

Mostyn questions

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.

How long will the bath be out of use?

Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Is there a smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Can you resurface a pink bath in white?

Yes, most people go for white. Mention the colour you want when you send pictures.

Where we work around Mostyn

Mostyn is about 6 miles south-west of West Kirby, in Flintshire. Jobs in Mostyn are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We cover 139 places in Flintshire. You can also see our page for Liverpool, about 15 miles away.

Jobs in CH8 are booked in the same way as anywhere else. That includes homes on Ffordd yr Aderyn, Ffordd Ddyfrdwy and Ffordd Pandarus. Mostyn sits on or near the A548, which makes travel easy. We also cover the places around Mostyn: Rhewl Mostyn (1 mile north-west), Glan-y-don (1 mile east), Gwibnant (1 mile south-east), Chwitffordd (1 mile south-west) and Gorsedd (2 miles south). Within a short drive, we also cover Connah's Quay (10 miles south-east), Buckley (12 miles south-east), Bwcle (12 miles south-east), Flint (7 miles south-east), Mold (11 miles south-east) and Holywell (3 miles south-east).

What’s near Mostyn

Typical jobs here are in homes near Glan y Don Inn, Ysgol Bryn Pennant C.P. and Christ Church. Well-known places in the area include Holywell Community Hospital (3.1 miles south-east) and St Winefride's Well Museum (2.6 miles south-east). Not far away are Coed y Garreg and Llyn Helyg.

Map of Mostyn © OpenStreetMap contributors

Repairing versus replacing in Mostyn

If the bath is sound, re-enamelling is typically much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Rooms protected and left tidy
  • Work done at your home or business
  • Most jobs done in one visit
  • Same prices wherever you are

Read our pricing or resurfacing vs replacement cost guide.

Repairs by material

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Looking after it afterwards

To keep it looking its best for years:

  • Clean with a soft cloth and mild detergent
  • Store bottles off the bath
  • A dripping tap should be fixed promptly
  • Leave the bath for the full curing time before using it

Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.

On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

Landlords, agents and businesses in Mostyn

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.

What affects the price in Mostyn

Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:

  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • The material
  • Previous DIY repairs that have to come out

The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Getting a price from pictures

Photographing the damage takes a minute. Please include:

  • Daylight if possible, and no flash reflection
  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates
  • Any earlier repairs or coatings

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.