Greater London · England

Bath Re-enamelling for Mottingham homes

Full bath re-enamelling and resurfacing at your home in Mottingham, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Mottingham

Bath re-enamelling in Mottingham without replacing anything

If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. Our technicians work on pressed steel baths, cast iron baths and Victorian roll-tops, and people most frequently call us about brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Area
Mottingham (SE9, SE12, BR1)
County
Greater London
Warranty
A year, on every repair
Quote
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

Honest limits

A few problems are outside what a surface repair can do:

  • Holes rusted through the metal
  • A poorly supported acrylic bath, until it’s firmed up
  • Anything hidden under an old coating, until we remove it

If in doubt, send photos and we will say what we think.

What we work on

  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays

Landlords, agents and businesses in Mottingham

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.

We work for landlords, letting agents and housing providers in Mottingham as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Rinse off hair dye, oils and bath bombs right away
  • Stick to gentle, non-abrasive cleaners
  • Get any chip repaired quickly
  • Dry the bath after use to stop limescale

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Don’t try to scrub a worn bath back to shine. It just wears the enamel further.

What we do, step by step

A typical visit goes like this: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Have somewhere for us to park nearby if possible
  • Plan for the room to be out of bounds to pets and children

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.

Send pictures for a quote

Advice

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Mottingham: your questions answered

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is there a smell?

A little, during the work. We set up ventilation and the smell fades as it cures.

It’s been repaired before. Can you still fix it?

Yes, regularly. Removing the old work can add time, and that is in the quote.

How do I get a price for bath re-enamelling in Mottingham?

Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your SE9 postcode.

Is there a guarantee?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

I rent my home. Can I book you?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

When to call us in Mottingham

A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.

Keep an eye out for these signs:

  • A bath that stays dull however much you clean it
  • A coloured bath you want in white
  • A peeling or bubbling previous coating
  • Staining under the taps and around the waste

Comparing quotes

  • How the colour is matched
  • How your room will be protected
  • A fixed quote, and whether VAT is included
  • What aftercare is recommended

Our hiring checklist

Prices and what affects them

Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:

  • How many items we do on one visit
  • The material and finish
  • The type of damage
  • Access to the area

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

How to get a fixed price

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A close-up of the damage, in focus
  • A coin or ruler next to the damage for scale
  • Details of any past repairs
  • The postcode, so we can plan the visit

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Mottingham and the surrounding area

Mottingham is about 1 mile south-west of Eltham, in Greater London. Jobs in Mottingham are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We cover 764 places across Greater London. We work right across the region, from Mottingham to London (7 miles away).

Postcode districts we cover here: SE9, SE12 and BR1. Whether you live on Horley Road, Dorset Road and Albert Road or anywhere nearby, a technician can come to you. Close by, we cover Chinbrook (1 mile south-west), Grove Park (1 mile west), Coldharbour (1 mile east), Middle Park (1 mile north) and Horn Park (1 mile north-west). We also work in nearby towns such as London (7 miles north-west), City of Westminster (10 miles north-west), Marylebone (10 miles north-west), Kensington (11 miles north-west), St Pancras (9 miles north-west) and Shoreditch (8 miles north-west).

Landmarks near Mottingham

Our clients here include homes close to Haberdashers' Aske's Knights Academy, Chinbrook Meadows and Jubilee International Church. Also close by are Marvels Lane Primary School (less than half a mile south-west) and Colfe's School (1.3 miles north-west). The nearest railway station is Grove Park station, about 0.7 miles west of the centre. Nearby you’ll also find Prefab Museum (1.7 miles west) and Greenwich Castle (3.5 miles north-west). The countryside around Mottingham includes Summer Hill and The Tarn.

  • Other local spots include Municipal Borough of Bromley (2.5 miles south)
Map of Mottingham © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.