Cambridgeshire · England
Bath re-enamelling & resurfacing in Moulton, Cambridgeshire
Our technicians come to Moulton for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Stains that won’t shift
- A coloured bath you want in white
How we handle bath re-enamelling in Moulton
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. If you’re dealing with a roll-top that’s seen better days and wear marks under the taps, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Moulton (CB8)
- Area hub
- Cambridgeshire
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:
- Any earlier repairs that need removing first
- The colour and finish to match
- Whether we combine several jobs
- What the surface is made of
Our prices are the same across the UK, with no extra for Moulton. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- The postcode, so we can plan the visit
- What it’s made of, if you know
- A wider photo showing the whole bath
- Whether it’s been repaired or coated before
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
How to care for the repair
It’s all simple stuff:
- A quick wipe after use keeps limescale away
- Do not use the bath until it has fully cured
- Do not leave a chip unrepaired
- Never use suction bath mats
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
About Moulton
Moulton is about 4 miles east of Newmarket, in Cambridgeshire. Jobs in Moulton are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover all 371 towns and villages across Cambridgeshire, from the larger towns to small villages. Our jobs stretch from Moulton to London (about 58 miles away).
Our visits in CB8 work the same way as everywhere else we cover. From Church Road, Brookside and Bridge Street or anywhere nearby, we can come to you. Moulton sits on or near the B1085, which makes travel easy. Other places close to Moulton include Kentford (2 miles north), Ashley (2 miles south), Kennett (2 miles north), Cheveley (2 miles south-west) and Broad Green (3 miles south). Larger places within reach include Cambridge (15 miles west), Newmarket (4 miles west), Ely (14 miles north-west), King's Hedges (15 miles west), Soham (9 miles north-west) and Chesterton (15 miles west).
Around Moulton
We visit homes around The Packhorse Inn and Church of St Peter. Moulton’s nearest station is Kennett station, about 1.8 miles north of the centre. A little further out are Cheveley Castle (2.2 miles south-west) and Newmarket Equine Hospital (5.6 miles west).
Towns and villages near Moulton
Other services in Moulton
Landlords, agents and businesses in Moulton
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Moulton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Signs you need bath re-enamelling in Moulton
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- Several chips and rust patches
Questions to ask before you book
- What prep work is covered
- Is the price fixed, and does it include VAT?
- How the colour is matched
- How the room is protected while they work
Repair or replace in Moulton?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Prices start from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Every repair guaranteed for a year
- One visit for most repairs
- Dust sheets down, tidy finish
- Colour-matched on site
Take a look at our prices page and resurfacing vs replacement cost guide.
Common questions in Moulton
How much does bath re-enamelling cost in Moulton?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you cover Moulton?
We do. We send a technician to Moulton for every job, with no extra charge for travel.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Which areas do you work in?
We cover the entire UK, including Moulton and the rest of Cambridgeshire. Just include your postcode and we will confirm dates.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
What we do, step by step
We begin by going over the job with you. Then the area is sheeted and masked and we start. You can expect it to take the best part of a day.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
How to get a price
To get a price, send a couple of pictures using our quote form or ring us. We will say right away whether it can be repaired.
Advice
When we would advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
