Lancashire · England
Bath Re-enamelling in Much Hoole
Our repair technicians come to Much Hoole for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A dull, rough surface that won’t come clean
Repairing versus replacing in Much Hoole
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why us?
- No extra charge for your area
- Every repair guaranteed for a year
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling at your home in Much Hoole
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with wear marks under the taps and a coloured bath you want in white, we can generally put it right, on pressed steel baths, acrylic baths and Victorian roll-tops alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Much Hoole (PR4)
- Area hub
- Lancashire
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair isn’t the answer
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
- A bath split right through the body
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
What we are called out for in Much Hoole
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Most people get in touch when they notice something like this:
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- A bath in a colour that no longer suits
- A dull, rough surface that will not come clean
Questions to ask before you book
- Whether the price is fixed and includes VAT
- Whether the price covers travel
- What preparation is included
- What the guarantee covers, and for how long
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
- Respect the curing time we give you
- Do not let dyes or oils sit on the finish
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Also near Much Hoole
More services for Much Hoole
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- How easy the damage is to reach
- The colour and finish to match
- The type of damage
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Where we work around Much Hoole
Much Hoole is about 4 miles south-west of Penwortham, in Lancashire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Much Hoole is one of 482 towns and villages in Lancashire where we work. Our nearest city page is Liverpool, about 21 miles away.
Every address in PR4 is within our area. We regularly work on streets such as Station Road, Horrocks Fold and Liverpool Old Road and the roads around them. Neighbouring places we cover include Hesketh Bank (2 miles west), Freckleton (4 miles north-west), Clifton (5 miles north), Newton-with-Scales (5 miles north) and Warton (5 miles north-west). Within a short drive, we also cover Preston (6 miles north-east), Chorley (8 miles south-east), Lytham St Anne's (9 miles west), Bamber Bridge (6 miles east), Leyland (4 miles east) and Fulwood (7 miles north-east).
Landmarks near Much Hoole
Our customers here include homes close to Church of St Michael, Hoole St Michael CofE Primary School and Tarleton Academy. Much Hoole’s nearest station is Croston station, roughly 2.6 miles south of the centre. Nearby you will also find Greaves Hall (5.1 miles west) and Penwortham Castle (4.9 miles north-east). The countryside around Much Hoole includes Mere Sands Wood.
Questions from Much Hoole
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Do you work in Much Hoole?
We do. We send a technician to Much Hoole for every job, and the price is the same as everywhere else.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover the whole of Lancashire?
We work UK-wide, so Much Hoole is covered. Our prices are the same everywhere.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
About our accreditations · Every repair comes with a one-year guarantee.
