Lancashire · England
Bath re-enamelling & resurfacing in Warton, Lancashire
Bath re-enamelling in Warton without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- A coating lifting around the plughole
Keeping it looking good
To keep it looking its best for years:
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Bath re-enamelling in Warton without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s an outdated colour you’d like to change and several chips and rust patches, we can normally put it right, whatever the material.
You get a one-year guarantee, the same in Warton as everywhere else we work.
- Location
- Warton (PR4)
- Region
- Lancashire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Our work in Warton
Warton is about 4 miles east of Lytham St Anne's, in Lancashire. Jobs in Warton are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover 482 places in Lancashire, from the larger towns to small villages. Our jobs stretch from Warton to Liverpool (24 miles away).
Our technicians cover all of the PR4 postcode area. Whether you live on Church Road, Blenheim Drive and Inglewood Close or a nearby road, we can come to you. Warton is on the A584, which makes it straightforward to reach. We also cover the places around Warton: Freckleton (1 mile east), Hall Cross (1 mile north-east), Ribby (2 miles north), Kirkham (2 miles north) and Wesham (3 miles north). Within a short drive, we also cover Preston (8 miles east), Chorley (13 miles south-east), Lytham St Anne's (4 miles west), Bamber Bridge (10 miles east), Leyland (9 miles south-east) and Fulwood (8 miles east).
Near you in Warton
Typical jobs here are in homes near Clifton Arms, Carr Hill High School and Sixth Form Centre and Holy Family Catholic Primary School, among other places. For rail, the closest station is Moss Side station, about 2.1 miles north-west of the centre. Nearby you’ll also find Lytham Hospital (2.3 miles south-west) and Lytham Motive Power Museum (1.9 miles south-west).
Landlords, agents and businesses in Warton
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
How it works
Visits start with a quick look at the job together, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take a full day, and we’ll tell you if anything changes.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
Ask for a price
To get a price, send a couple of photos through our quote form or ring us. We will say right away whether it can be repaired.
Related advice
Common problems we fix in Warton
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- A roll-top that’s seen better days
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- Several chips and rust patches
Questions to ask before booking
- Whether the colour is mixed to match
- What the guarantee covers, and for how long
- A fixed price, and whether VAT is included
- How long it needs to cure
Nearby places to Warton
Other services in Warton
Your questions about bath re-enamelling in Warton
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
What happens next?
We come back with a fixed price, plus dates. You’re under no obligation.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is my repair covered?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- Any earlier repairs that need removing first
- What the surface is made of
- How much damage there is
- How many items we do on one visit
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- What it’s made of, if you know
- A picture taken from further back
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why book with us
- We’ll tell you if it’s not worth repairing
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- One visit for most repairs
Read our pricing or guide to resurfacing and replacement costs.
What a repair can’t fix
A repair isn’t right for every job, including:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
