West Lothian · Scotland
Bath Re-enamelling in Murieston
Our technicians come to Murieston for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A coating lifting around the plughole
Questions from Murieston
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How do I get a price for bath re-enamelling in Murieston?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your EH54 postcode.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Bath re-enamelling at your home in Murieston
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair pressed steel baths, acrylic baths and basins & shower trays, and people most frequently call us about a peeling or bubbling previous coating and a bath that stays dull however much you clean it.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Murieston (EH54)
- Area hub
- West Lothian
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Murieston
Also in Murieston
Landlords, agents and businesses in Murieston
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Should you replace it?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Murieston clients choose us
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
See our full price list or guide to resurfacing and replacement costs.
Covering Murieston
Murieston is about 2 miles south of Livingston, in West Lothian. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in all 58 towns and villages in West Lothian. Our jobs stretch from Murieston to Edinburgh (about 13 miles away).
Here we cover the EH54 postcode area. We regularly work on streets such as Monks Lane, Bonaly Lane and Wellview Lane and the roads around them. Other places close to Murieston include Dedridge (1 mile north-west), Bellsquarry (1 mile west), Adambrae (1 mile west), Howden (2 miles north) and Livingston Village (2 miles north-west). Larger places within reach include Bathgate (6 miles west), Linlithgow (8 miles north-west), Whitburn (7 miles west), East Calder (3 miles north-east), Broxburn (5 miles north) and Armadale (8 miles west).
Near you in Murieston
We visit homes around Inveralmond Community High School. Murieston has its own railway station: Livingston South station. A little further out are Illieston Castle (4.1 miles north-east) and The Centre (1.2 miles north). Not far away are Dechmont Law.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Let us know if it has been repaired before
- Clear the area around the damage
- Open a window if you can
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- Unusual colours or finishes
- The material
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
How to get a fixed quote
Two or three clear photos are usually enough. It helps if you send:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Any details about the material
- One picture of the entire bath
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed price, not an estimate.
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- A quick wipe after use keeps limescale away
- Store bottles off the bath
- Never use suction bath mats
- Use washing-up liquid and a soft cloth
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
What we can’t put right
Before you book, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- A bath that’s rusted through
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
