Greater London · England
Bath re-enamelling & resurfacing in Nash, Greater London
Bath re-enamelling for Nash, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits

How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Repair dripping taps early
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
About our bath re-enamelling in Nash
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. Our repair technicians work on Victorian roll-tops, basins & shower trays and cast iron baths, and common reasons people contact us are an outdated colour you’d like to change and a roll-top that’s seen better days.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.

- Where
- Nash (BR2)
- Area hub
- Greater London
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Nash
Nash is about 3 miles south of Bromley, in Greater London. Jobs in Nash are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We cover all 764 towns and villages across Greater London. Our jobs stretch from Nash to London (about 11 miles away).
All of BR2 is covered, from the main roads to the quietest streets. Streets in the area include Nash Lane and North Pole Lane. We also cover the places around Nash: Keston (1 mile east), Leaves Green (1 mile south-east), Hayes (1 mile north), New Addington (2 miles south-west) and Farthing Street (2 miles south-east). Further out, we also cover London (11 miles north-west), City of Westminster (13 miles north-west), Marylebone (13 miles north-west), Kensington (14 miles north-west), St Pancras (13 miles north-west) and Shoreditch (12 miles north).
Near you in Nash
We visit homes around All Saints Catholic School, Wickham Common Primary School and The Greyhound pub and the streets around them. Other local landmarks include Coney Hall Recreation Ground (1.1 miles north-west) and Keston Parish Church (1 mile south-east). For rail, the closest station is Hayes (Kent) station, roughly 1.4 miles north of the centre. Further afield, we also cover the area around The Mall (3.2 miles north) and Bethlem Museum of the Mind (1.8 miles north). Green spaces nearby include Hutchinson's Bank and Summer Hill.
What we do, step by step
Here’s how a visit normally runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Plan for most of the day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Plan for the room to be out of bounds to pets and children
How to get a price
For a price in Nash, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Repair or replace: which is better?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the next day. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Nash
- Work done at your home or business
- Free fixed quotes from pictures
- Straight answers about what a repair can do
- No need to remove anything
Read our prices page or guide to resurfacing and replacement costs.
FAQs for Nash
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Are there extra charges for Nash?
Travel is included in the price, and we charge the same wherever you are.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is my repair covered?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What happens after I send pictures?
We review the photos and send a fixed quote with dates.
What else we do in Nash
Landlord and trade work in Nash
Housing associations and facilities teams use us for planned and reactive repairs in Greater London and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What affects the price in Nash
Prices start from £350. There is no charge for travel to Nash. The price comes down to:
- Unusual colours or finishes
- The material
- How much damage there is
- Previous DIY repairs that have to come out
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- A wider photo showing the whole bath
Send us a photo of the damage and a wider shot of the whole item, and tell us you are in Nash, and we’ll reply with a fixed price.
Do you need bath re-enamelling in Nash?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- Stains that will not shift
- Several chips and rust patches
- A coloured bath you want in white
- A period or roll-top bath worth keeping
What your quote should include
- Whether cleaning and preparation are in the price
- Who turns up on the day
- How long the guarantee is and what it covers
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.

