Greater London · England
Bath Re-enamelling for Keston homes
Problem with your bath in Keston? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our bath re-enamelling in Keston
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We work on cast iron baths, pressed steel baths and basins & shower trays, and the jobs we see most are chips and rust in more than one place and stains that won’t shift.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Location
- Keston (BR2)
- Region
- Greater London
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Keston
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Typical reasons for a call-out include:
- An old resurfacing that’s failing
- Chips and rust in more than one place
- Stains that will not shift
- An original cast iron bath that needs restoring
Comparing quotes
- What the guarantee covers, and for how long
- Whether the price covers travel
- Who will actually do the work
- How the colour is matched
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Keston. The price depends on:
- Unusual colours or finishes
- What kind of damage it is
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
A repair generally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Send photos for a quote
You can generally get a fixed quote without us visiting. To help us price it:
- Details of any past repairs
- The material, if you know it
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Get any chip repaired quickly
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Keston questions
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
What happens after I send pictures?
We review the photos and send a fixed quote and the next dates we have.
Towns and villages near Keston
What else we do in Keston
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- A bath split right through the body
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Keston and the surrounding area
Keston is about 3 miles south of Bromley, in Greater London. Our repair technicians come to homes and businesses in Keston, so you don’t need to take anything anywhere. Keston is one of 764 towns and villages in Greater London where we work. We work right across the region, from Keston to London (11 miles away).
Every address in BR2 is covered, from the main roads to the quietest streets. Jobs here include addresses on Church Road, Greys Park Close and Heathfield Road. If you are just outside Keston, we cover Nash (1 mile west), Farthing Street (1 mile south-east), Locksbottom (1 mile north-east), Leaves Green (2 miles south) and Hayes (2 miles north-west). We also work in nearby towns such as London (11 miles north-west), City of Westminster (13 miles north-west), Marylebone (13 miles north-west), Kensington (14 miles north-west), St Pancras (13 miles north-west) and Shoreditch (12 miles north).
Local landmarks in Keston
We visit homes around South Park, Keston Parish Church and Keston Church of England Primary School and the streets around them. Other local landmarks include The Greyhound pub (less than half a mile north-west) and Ravens Wood School (0.7 miles north). For rail, the closest station is Hayes (Kent) station, roughly 1.5 miles north-west. A little further out are The Mall (3 miles north) and Princess Royal University Hospital (1.1 miles east). The countryside around Keston includes West Kent Golf Course nature reserve and Summer Hill.
- Local facilities include Municipal Borough of Bromley (2.8 miles north)
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
The process
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let us know if it has been repaired before
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
