Wrexham · Wales
Bath Re-enamelling for Plas Coch homes
Damaged bath in Plas Coch? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Bath re-enamelling at your home in Plas Coch
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Typical jobs include several chips and rust patches and an original cast iron bath that needs restoring, in cast iron baths, basins & shower trays and acrylic baths.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Plas Coch (LL11, LL13, LL12)
- Region
- Wrexham
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Visits start with a quick look at the job together, so you know exactly what we’re doing. After that, protection goes down around the work area and we start. It normally takes the best part of a day.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Open a window if you can
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
Get a quote
For a price in Plas Coch, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
When we’d advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Repairing versus replacing in Plas Coch
Replacing a bath can take several days across several trades. Resurfacing takes one technician and typically a day. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
What you get with us
- One visit for most repairs
- A fixed quote before you book
- Colour-matched on site
- No need to remove anything
Read our full price list or guide to resurfacing and replacement costs.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- What the surface is made of
- Unusual colours or finishes
- How much damage there is
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
You can take the photos on your phone. Make sure they show:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Something in shot to show the size
- A wider photo showing the whole bath
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Respect the curing time we give you
- Rinse off hair dye, oils and bath bombs immediately
- Keep suction mats out of the bath
- Repair dripping taps early
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Places near Plas Coch
Also in Plas Coch
Plas Coch and nearby
Plas Coch is about 1 mile west of Wrexham, in Wrexham. Clients in Plas Coch get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Plas Coch is one of 115 places in Wrexham we cover. Our nearest city page is Liverpool, about 25 miles away.
Here we cover the LL11, LL13 and LL12 postcode area. From New Road, Mold Road and Berse Road or a nearby road, a technician can come to you. Plas Coch sits on or near the A483 and A541, so getting to you is simple. We also cover the places around Plas Coch: Stansty (1 mile north-west), Old Rhosrobin (1 mile north), Highfield (1 mile north-west), Rhosrobin (1 mile north) and New Broughton (1 mile west). Larger places within reach include Rhosllannerchrugog (4 miles south-west), Pentredŵr (4 miles south-west), Llay (3 miles north), Pant (4 miles south-west), Gresford (3 miles north-east) and Coedpoeth (3 miles west).
Landmarks near Plas Coch
Typical jobs here are in homes near Rhosddu Primary School, Turf Hotel and Bellevue Park. You’ll also find Grove Park School (0.7 miles south-east), Ysgol Clywedog (0.8 miles south), Church of St. James (under half a mile east) and St Giles' Church (0.9 miles south-east). Plas Coch has its own railway station: Wrexham General station. Well-known places in the area include Tŷ Pawb (0.9 miles south-east) and Wrexham Maelor Hospital (0.6 miles south). Open spaces near Plas Coch include Pant-yr-ochain Big Pool and Wilderness Tip (Gresford).
When to call us in Plas Coch
Often the bath has just had decades of use. The body of the bath is normally perfectly sound.
Look out for any of the following:
- Thin, worn enamel in places
- Lots of chips and rust spots
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Questions to ask before booking
- What aftercare is recommended
- How the colour is matched
- What happens if they find more damage
- Whether there are any call-out or travel charges
Landlords, agents and businesses in Plas Coch
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Plas Coch use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Your questions about bath re-enamelling in Plas Coch
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you fix a peeling bath coating?
Generally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What if the damage is worse than the pictures show?
We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
About our accreditations · Every repair comes with a one-year guarantee.
