Pembrokeshire · Wales
Bath Re-enamelling for Nolton Haven homes
Bath re-enamelling in and around Nolton Haven: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Stains that won’t shift
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Nolton Haven
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Our technicians work on pressed steel baths, Victorian roll-tops and acrylic baths, and people most frequently call us about an outdated colour you’d like to change and several chips and rust patches.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Nolton Haven (SA62)
- County
- Pembrokeshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
- Don’t leave a chip unrepaired
- A dripping tap should be fixed promptly
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Nolton Haven. What changes the price is:
- Doing more than one item at once
- Where the damage is and how we get to it
- How hard the colour is to match
- Any earlier repairs that need removing first
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Getting a price from photos
A couple of clear pictures is all it takes. It helps if you send:
- Details of any past repairs
- The material, if you know it
- Where you are, by postcode
- A coin or ruler next to the damage for scale
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
What we cannot put right
A repair is not always the answer, and we will tell you before we start. Repairs will not solve:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
Send us pictures and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Our work in Nolton Haven
Nolton Haven is about 6 miles west of Haverfordwest, in Pembrokeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 223 places in Pembrokeshire.
Jobs in SA62 work the same way as everywhere else we cover. You’ll find streets such as Meadow Lane, Welsh Road and Folkeston Hill, and we cover them all. Neighbouring places we cover include Wood (2 miles north), Newgale (3 miles north), Penycwm (3 miles north), Brawdy (3 miles north) and St Elvis (5 miles north-west). Larger places within reach include Haverfordwest (6 miles east), Milford Haven (8 miles south), Pembroke (13 miles south-east), Pembroke Dock (12 miles south-east), The Marsh (6 miles east) and Fishguard (13 miles north-east).
Local landmarks in Nolton Haven
In Nolton Haven, that means homes near Church of St Madoc and The Mariners Inn and the streets around them. Other landmarks nearby include Roch Castle (2 miles north-east). Green spaces nearby include Rogeston Mount.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to most of the day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Advice
Nolton Haven questions
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can I get a quote without a visit?
In nearly every case. If photos don’t show enough, we will ask for another angle.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Do you cover Nolton Haven?
Yes. We cover the whole UK and come to Nolton Haven. Send us photos for a fixed quote, or call 0345 017 0787.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
More services for Nolton Haven
Repair or replace: which is better?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the following day. Prices start from £350. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Why Nolton Haven clients choose us
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- Work done at your home or business
- CHAS and Constructionline accredited
Read our full price list or guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Common problems we fix in Nolton Haven
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Signs it’s time to call us include:
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
Questions to ask before booking
- How long it needs to cure
- Whether cleaning and preparation are in the price
- The length of the guarantee and what it covers
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
