Pembrokeshire · Wales
Bath Re-enamelling in Wood
Fixed-price bath re-enamelling in Wood and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- An old resurfacing that’s failing
Bath re-enamelling in Wood, done in place
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s a bath that stays dull however much you clean it and several chips and rust patches, we can generally put it right, on acrylic baths, Victorian roll-tops and cast iron baths alike.
Every repair is covered by our one-year guarantee, wherever you are in Pembrokeshire.
- Location
- Wood (SA62)
- Area hub
- Pembrokeshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Wood
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
How long will the bath be out of use?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.
What areas do you cover?
Everywhere in the UK, Wood included. There is no extra charge for travel.
Places near Wood
Also in Wood
What we do, step by step
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take a full day.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep a parking space free if you can
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Read more
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Keeping it looking good
To keep it looking its best for years:
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
- Don’t use the bath until it has fully cured
- Have chips seen to early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
Repairing versus replacing in Wood
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing usually wins. Prices start from £350. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Wood
- One visit for most repairs
- Free fixed quotes from pictures
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list and resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- The material and finish
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
How to get a fixed quote
Most quotes are done from pictures alone. To help us price it:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Any details about the material
- One picture of the entire bath
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Covering Wood
Wood is about 7 miles north-west of Haverfordwest, in Pembrokeshire. Clients in Wood get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Wood is one of 223 towns and villages in Pembrokeshire we cover.
Here we cover the SA62 postcode area. Close by, we cover Newgale (1 mile north-west), Penycwm (1 mile north), Brawdy (1 mile north-west), Nolton Haven (2 miles south) and St Elvis (3 miles north-west). Further out, we also cover Haverfordwest (7 miles south-east), Milford Haven (10 miles south), Pembroke (15 miles south-east), Pembroke Dock (14 miles south-east), The Marsh (7 miles south-east) and Fishguard (11 miles north-east).
Near you in Wood
Locally, our jobs take us to homes close to The Duke of Edinburgh pub and Roch C.P. School, among other places. Further afield, we also cover the area around Roch Castle (1.6 miles east). Green spaces nearby include Roch Castle.
Signs you need bath re-enamelling in Wood
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
Send us a photo if you notice any of these:
- Enamel that’s lost its shine and feels rough
- Chips and rust in more than one place
- Thin, worn enamel in places
- Staining under the taps and around the waste
Comparing quotes
- Whether the price covers travel
- The length of the guarantee and what it covers
- What happens if they find more damage
- Whether the colour is mixed to match
When we’d advise against a repair
In fairness, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Landlord and trade work in Wood
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
