Pembrokeshire · Wales

Bath Re-enamelling in Newgale

Problem with your bath in Newgale? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Newgale

Bath re-enamelling in Newgale, done in place

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Common call-outs are for thin, worn enamel in places and a bath in a colour that no longer suits, in basins & shower trays, acrylic baths and cast iron baths.

Whatever the size of the job, you get the same one-year guarantee in Newgale and across Pembrokeshire.

Before and after: an old basin refinished to bright white
Where
Newgale (SA62)
County
Pembrokeshire
Cover
One year on every repair
Quotes
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Honest limits

We will always be straight with you, so here’s what a repair will not do:

  • Acrylic that moves when you stand in it
  • Leaking taps or wastes (a plumber’s job)
  • A metal bath with a through crack

Not sure? Send pictures and we will give you a straight answer before you book.

What we work on

  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths

What bath re-enamelling costs

Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:

  • Access to the area
  • How hard the colour is to match
  • Whether old repairs or coatings need taking off
  • The material

Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Send photos for a quote

Most quotes are done from photos alone. To make it quick:

  • What it’s made of, if you know
  • A photo taken from further back
  • One sharp close-up of the damage
  • Where you are, by postcode

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Common questions in Newgale

How long will the bath be out of use?

Typically one day, with the bath ready the following day. Deeply pitted baths may need a second day.

What areas do you cover?

Across the UK, so Newgale is covered. Prices do not change with location.

Can you resurface a pink bath in white?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room masked and ventilated.

How do I book?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can you quote from photos?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

Do the materials smell?

There may be a mild smell during the work that clears as it cures.

How to look after the repair

Looking after the surface is easy, and it makes a real difference:

  • Wash away dyes and oils after use
  • Have chips seen to early
  • Wipe the bath dry after use in hard water areas
  • Store bottles off the bath

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Common problems we fix in Newgale

Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Contact us if you’ve noticed:

  • Stains that will not shift
  • A period or roll-top bath worth keeping
  • A coloured bath you want in white
  • Wear marks under the taps

Questions to ask before you book

  • How the room is protected while they work
  • How the colour is matched
  • How to look after the finish
  • What preparation is included

Our hiring checklist

Covering Newgale

Newgale (Welsh: Niwgwl) is about 8 miles north-west of Haverfordwest, in Pembrokeshire. We travel to clients in Newgale and nearby villages, so you do not need to take anything anywhere. We cover all 223 towns and villages in Pembrokeshire.

Our technicians cover all of the SA62 postcode area. We also cover the places around Newgale: Wood (1 mile south-east), Penycwm (1 mile north), Brawdy (1 mile north), Nolton Haven (3 miles south) and St Elvis (3 miles west). Further out, we also cover Haverfordwest (8 miles south-east), Milford Haven (11 miles south), Pembroke Dock (14 miles south-east), The Marsh (8 miles south-east), Fishguard (11 miles north-east) and Green (15 miles south-east).

Landmarks near Newgale

Our customers here include homes close to Church Of Saint David and The Duke of Edinburgh pub, among other places. Further afield, we also cover the area around Pointz Castle (1.4 miles north-west). The countryside around Newgale includes Dinas Fach.

Map of Newgale © OpenStreetMap contributors

The process

A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Getting ready for the visit

  • Move bottles, mats and clutter away from the area
  • Keep children and pets away from the room on the day
  • Make sure the room can be ventilated

How to get a price

Upload pictures of the damage and one of the whole item, and tell us you are in Newgale, and we’ll come back with a fixed quote.

Get a fixed price

Advice

Repairs by material

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.