Wiltshire · England
Bath re-enamelling & resurfacing in Nomansland, Wiltshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Nomansland. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
Bath re-enamelling in Nomansland without replacing anything
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a period or roll-top bath worth keeping and brown or grey marks that don’t clean off, we can usually put it right, whatever the material.
All of our repairs are guaranteed for twelve months in Nomansland and everywhere else. If something goes wrong with the work, we come back.
- Location
- Nomansland (SP5)
- Region
- Wiltshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Places near Nomansland
More services for Nomansland
What bath re-enamelling costs
Resurfacing from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- Unusual colours or finishes
- How many items we do on one visit
- Any earlier repairs that need removing first
- What the surface is made of
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- A wider photo showing the whole bath
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Keeping it looking good
To keep it looking its best:
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
- Store bottles off the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- Acrylic that moves when you stand in it
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Where we work around Nomansland
Nomansland is about 6 miles north-west of Totton, in Wiltshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 425 towns and villages across Wiltshire. You can also see our page for London, about 77 miles away.
Every address in SP5 is covered. Whether you live on York Drove, Forest Road and Pear Tree Drive or a nearby road, a technician can come to you. Other places close to Nomansland include Landford (1 mile north), Bramshaw (1 mile south-east), Hamptworth (2 miles north-west), Plaitford (2 miles north-east) and Canada (2 miles east). Within a short drive, we also cover Salisbury (11 miles north-west), Bugmore (10 miles north-west), Milford (10 miles north-west), Old Sarum (12 miles north-west), Harnham (10 miles north-west) and Bemerton (11 miles north-west).
What’s near Nomansland
In Nomansland, that means homes near The Lamb Inn, The New Forest CofE (VA) Primary School and Church of St Peter. A little further out are Tatchbury Mount Hospital (5.1 miles east). For a walk, there is Copythorne Common.
What happens on the day
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and we leave the room as we found it.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Let us know about parking or access
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
Landlords, agents and businesses in Nomansland
We work for landlords, letting agents and housing providers in Nomansland as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We are used to working with agents and managing companies. Send the address, photos and access details.
Questions from Nomansland
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How long does re-enamelling take?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
How quickly can you book me in?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Repairing versus replacing in Nomansland
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- We’ll tell you if it’s not worth repairing
- A fixed quote before you book
- Colour-matched on site
- A year’s guarantee on all work
Take a look at our prices page and bath cost comparison.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
