Greater London · England
Bath Re-enamelling in North Cray
We travel to North Cray for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
Repair or replace in North Cray?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in North Cray
- A year’s guarantee on all work
- Everything repaired in place
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing or guide to resurfacing and replacement costs.
About our bath re-enamelling in North Cray
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. We are frequently asked to fix brown or grey marks that don’t clean off and worn patches where water runs and sits, on acrylic baths, pressed steel baths and cast iron baths.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- North Cray (DA14)
- Region
- Greater London
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
When to call us in North Cray
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
People generally call us after spotting something like this:
- Chips and rust in more than one place
- An old resurfacing that is failing
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
Questions to ask before booking
- Who turns up on the day
- What aftercare is recommended
- What preparation is included
- Whether they match the colour on site
About North Cray
North Cray is about 2 miles east of Sidcup, in Greater London. Anywhere in DA14, we come to you. We cover all 764 towns and villages in Greater London. We work right across the region, from North Cray to London (about 11 miles away).
Postcode districts we cover here: DA14. We regularly work on streets such as Water Lane, North Cray Road and Leafield Lane. Nearby, we also work in Bexley (1 mile north), Coldblow (1 mile north-east), Ruxley (1 mile south), Blendon (1 mile north-west) and Joyden's Wood (1 mile east). We also work in nearby towns such as London (11 miles north-west), City of Westminster (14 miles north-west), Marylebone (14 miles north-west), Kensington (15 miles west), St Pancras (13 miles north-west) and Shoreditch (11 miles north-west).
Landmarks near North Cray
Typical jobs here are in homes near Foots Cray Meadows, The White Cross pub and Parish Church of St James and the streets around them. Other local landmarks include Cleeve Park School (0.9 miles west) and Royal Park Primary Academy (under half a mile west). The nearest railway station is Albany Park station, roughly 0.6 miles north-west of the centre. Other landmarks nearby include Broadway Shopping Centre (1.7 miles north) and Bexley Hospital (1.8 miles north). Green spaces nearby include Wansunt Pit and Summer Hill.
Landlords, agents and businesses in North Cray
For anyone letting property in or around North Cray, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
How it works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Let us know if it has been repaired before
How to get a price
If you are in North Cray and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Towns and villages near North Cray
Also in North Cray
What a repair can’t fix
We would rather lose a job than do one that will not last, so these are the limits:
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- How much damage there is
- Doing more than one item at once
- How easy the damage is to reach
A repair is priced on what needs doing, not your postcode. You will see the full price before booking.
How to get a fixed price
We price nearly every job from pictures. This is what to send:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
North Cray: your questions answered
Which areas do you work in?
We work UK-wide. Prices don’t change with location.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
About our accreditations · Every repair comes with a one-year guarantee.
