Somerset · England
Bath Re-enamelling in Old Cleeve
We travel to Old Cleeve for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coating lifting around the plughole
How it works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
How we handle bath re-enamelling in Old Cleeve
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you’re dealing with a bath that stays dull however much you clean it and wear marks under the taps, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Old Cleeve (TA24)
- Area hub
- Somerset
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Old Cleeve
Old Cleeve is about 5 miles south-east of Minehead, in Somerset. Clients in Old Cleeve get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Old Cleeve is one of 640 towns and villages in Somerset we cover.
Every address in TA24 is covered. You’ll find streets such as Monks' Path and Dairylands. If you’re just outside Old Cleeve, we cover Chapel Cleeve (1 mile north), Washford (1 mile south-east), Bilbrook (1 mile south-west), Torre (1 mile south) and Roadwater (2 miles south). We also work in nearby towns such as Minehead (5 miles north-west), Wellington (15 miles south-east), Comeytrowe (15 miles south-east), Wiveliscombe (9 miles south), Williton (3 miles east) and Bishops Lydeard (11 miles south-east).
Near you in Old Cleeve
In Old Cleeve, that means homes near The Washford Inn, Old Cleeve CofE School and St Andrew's Church, among other places. Further afield, we also cover the area around Somerset And Dorset Railway Trust Museum (0.6 miles south-east) and Dunster Castle (3.1 miles west). Open spaces near Old Cleeve include Castle Hill.
What a repair cannot fix
A repair isn’t right for every job, including:
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send pictures and we’ll say what we think.
What we work on
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Cast iron baths
Old Cleeve questions
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Is it worth repairing rather than replacing?
Generally, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
How long does re-enamelling take?
Most baths are done in a day, ready the day after. We will confirm timings when we quote.
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
Repairing versus replacing in Old Cleeve
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
- Honest advice, even when it means no job
- Free fixed quotes from pictures
See our pricing and bath cost comparison.
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- Whether old repairs or coatings need taking off
- Access to the area
- The material
- How much damage there is
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- Any earlier repairs or coatings
- Something in shot to show the size
- Any details about the material
- Your postcode, so we can check dates
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Aftercare tips
Once the work has cured, treat it gently:
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Do not leave bottles, razors or sponges standing on the surface
- Do not leave a chip unrepaired
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Also in Old Cleeve
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Landlords, agents and businesses in Old Cleeve
We regularly work with letting and managing agents. Send the address, photos and access details.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
