Somerset · England
Bath Re-enamelling for Roadwater homes
Local bath re-enamelling for Roadwater: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coating lifting around the plughole
- A dull, rough surface that won’t come clean
Bath re-enamelling in Roadwater without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We are frequently asked to fix an original cast iron bath that needs restoring and worn patches where water runs and sits, in basins & shower trays, cast iron baths and Victorian roll-tops.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Roadwater (TA23)
- Region
- Somerset
- Warranty
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to the best part of a day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Make sure the room can be ventilated
- Let us know which floor the room is on
Ask for a price
To get a price, send a couple of photos through our quote form or call us. We’ll say right away whether it can be repaired.
Read more
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Roadwater. The price depends on:
- How hard the colour is to match
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The material
A repair normally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Quotes from your photos
You can typically get a fixed price without us visiting. To help us price it:
- The material, if you know it
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- A clear, close picture of the problem area
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Roadwater and nearby
Roadwater is about 6 miles south-east of Minehead, in Somerset. Whether you are in the middle of Roadwater or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Roadwater is one of 640 places in Somerset we cover.
We work across the TA23 postcode area. From Brendon Close, Clitsome View and Watersmeet Close or a nearby road, we can come to you. We also cover the places around Roadwater: Torre (1 mile north-east), Bilbrook (1 mile north), Washford (1 mile north-east), Nettlecombe (1 mile south-east) and Old Cleeve (2 miles north). We also work in nearby towns such as Taunton (15 miles south-east), Minehead (6 miles north-west), Wellington (13 miles south-east), Wilton (15 miles south-east), Comeytrowe (14 miles south-east) and Watchet (3 miles north-east).
Landmarks near Roadwater
We visit homes around Valiant Soldier pub and St Luke, among other places. Nearby you’ll also find Somerset And Dorset Railway Trust Museum (1.4 miles north) and Dunster Castle (3.9 miles north-west). The countryside around Roadwater includes Castle Hill.
How to look after the repair
Most damage we see is avoidable. These habits help:
- Rinse off hair dye, oils and bath bombs right away
- Wipe the bath dry after use in hard water areas
- A dripping tap should be fixed promptly
- Do not use the bath until it has fully cured
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- A metal bath with a through crack
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Towns and villages near Roadwater
Other services in Roadwater
Landlord and trade work in Roadwater
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
FAQs for Roadwater
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
What happens after I send photos?
You will get a fixed quote back, normally with dates to choose from. You’re under no obligation.
When to call us in Roadwater
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we are asked about most:
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
- A bath in a colour that no longer suits
- Wear marks under the taps
Before you book anyone
- What the guarantee covers, and for how long
- How the colour is matched
- When it can be used again
- How the room is protected while they work
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
