Oxfordshire · England

Bath re-enamelling & resurfacing in Walton Manor, Oxfordshire

We travel to Walton Manor for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Walton Manor?

Bath re-enamelling in Walton Manor without replacing anything

Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Our technicians work on basins & shower trays, acrylic baths and cast iron baths, and common reasons people contact us are an old resurfacing that’s failing and brown or grey marks that don’t clean off.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Where
Walton Manor (OX2, OX1)
County
Oxfordshire
Warranty
A year, on every repair
Quotes
From £350. Free, fixed quote from pictures
Call
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

What affects the price in Walton Manor

Prices start from £350. Quotes are free and the price is fixed. What we look at:

  • How hard the colour is to match
  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • What kind of damage it is

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Quotes from your photos

Phone pictures are fine, there is no need for anything special. Ensure they show:

  • Any earlier repairs or coatings
  • Any details about the material
  • Something in shot to show the size
  • A close-up of the damage, in focus

For a price in Walton Manor, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

How the visit works

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take most of the day, and we’ll tell you if anything changes.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Mention any earlier repairs or resurfacing
  • Let us know about parking or access

How to get a price

Email us a photo of the damage and a wider shot of the entire item, with your OX2 postcode, and we’ll come back with a fixed quote.

Get a free quote

Advice

Can I fix it myself?

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Walton Manor: your questions answered

Can you resurface a pink bath in white?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

Is there a guarantee?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Do the materials smell?

It depends on the job, but often a little. Open windows and an extractor fan help.

Is there a smell?

There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.

Can you fix a peeling bath coating?

Yes. Removing the old finish takes extra time, which we include in the price.

When can you do it?

It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.

Can you re-enamel a roll-top bath?

Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

What your bath is made of matters

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Our work in Walton Manor

Walton Manor is about 2 miles north-west of Oxford, in Oxfordshire. Across the OX2 area, we carry out the work at your property. We work in 443 places in Oxfordshire, from the larger towns to small villages. Our nearest city page is London, about 53 miles away.

Our technicians cover all of the OX2 and OX1 postcode area. Whether you live on Combe Road, Keble Road and Crick Road or anywhere nearby, a technician can come to you. Being close to the A4144, Walton Manor is simple for us to get to. Neighbouring places we cover include Jericho (1 mile south), Park Town (1 mile north-east), Norham Manor (1 mile east), St John Street area (1 mile south) and North Oxford (1 mile north). Larger places within reach include Didcot (11 miles south), Bicester (11 miles north-east), Abingdon-on-Thames (6 miles south), Witney (10 miles west), Carterton (14 miles west) and Thame (13 miles east).

Around Walton Manor

Our customers here include homes close to St Hugh's College Main Building Including Library, Oxford Centre for Mission Studies and Oxford Academy, among other places. Nearby too are Oxford University Parks (0.5 miles east), Wychwood School (within half a mile north-east), The Gardeners Arms (less than half a mile south) and St Aloysius' Catholic Primary School (less than half a mile north). The nearest railway station is Oxford station, roughly 0.7 miles south. Well-known places in the area include Oxford Castle (0.9 miles south) and Oxford University Press Museum (under half a mile south). Green spaces nearby include Hook Meadow and The Trap Grounds and Headington Hill.

Map of Walton Manor © OpenStreetMap contributors

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Store bottles off the bath
  • Don’t let dyes or oils sit on the finish
  • Stick to gentle, non-abrasive cleaners
  • A dripping tap should be fixed promptly

Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.

If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Why repair rather than replace?

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Colour mixed on the day to match
  • A fixed quote before you book
  • CHAS, Constructionline and SafeContractor accredited
  • Work done at your home or business

Take a look at our prices page and guide to resurfacing and replacement costs.

Landlord and trade work in Walton Manor

We carry out planned and one-off repairs for housing associations and facilities teams in Oxfordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Common problems we fix in Walton Manor

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.

The things customers normally mention when they call include:

  • A roll-top that’s seen better days
  • An old resurfacing that is failing
  • A bath in a colour that no longer suits
  • A bath that stays dull however much you clean it

Comparing quotes

  • How the room is protected while they work
  • How soon you can use it again
  • How changes to the job are handled
  • Whether cleaning and preparation are in the price

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.