Glasgow · Scotland
Bath re-enamelling & resurfacing in Parkhouse, Glasgow
Local bath re-enamelling for Parkhouse: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Parkhouse
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. We regularly repair basins & shower trays, pressed steel baths and cast iron baths, and the jobs we see most are staining under the taps and around the waste and an original cast iron bath that needs restoring.
Every repair comes with our one-year guarantee, wherever you are in Glasgow.
- Location
- Parkhouse (G53, G78)
- Area hub
- Glasgow
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Nearby places to Parkhouse
Other services in Parkhouse
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams in Glasgow and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What we’re called out for in Parkhouse
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
Typical reasons for a call-out include:
- Stains that will not shift
- Lots of chips and rust spots
- A coloured bath you want in white
- A bath that stays dull however much you clean it
What your quote should include
- How the room is protected while they work
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- How long it needs to cure
FAQs for Parkhouse
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item and your postcode.
What areas do you cover?
All of Glasgow, and the rest of the UK. Travel is included in the price.
How long will the bath be out of use?
One day for most baths, ready the next day. We will confirm timings when we quote.
Can I get a quote without a visit?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Where we work around Parkhouse
Parkhouse is about 1 mile east of Barrhead, in Glasgow. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Parkhouse is one of 183 places in Glasgow where we work.
Postcode districts we cover here: G53 and G78. Whether you live on Whithope Road, Corselet Road and Waukglen Road or anywhere nearby, we can come to you. Other places close to Parkhouse include South Nitshill (1 mile north), Darnley (1 mile north-east), Southpark Village (1 mile east), Nitshill (1 mile south-west) and Priesthill (1 mile north). Further out, we also cover Glasgow (5 miles north-east), Hillhead (6 miles north-east), Dowanhill (5 miles north-east), Woodlands (6 miles north-east), Woodside (6 miles north-east) and North Kelvinside (6 miles north-east).
What’s near Parkhouse
Typical jobs here are in homes near Rouken Glen, Glasgow and Barrhead High School and the streets around them. For rail, the closest station is Nitshill station, about 0.5 miles north. Further afield, we also cover the area around Silverburn Shopping Centre (1.4 miles north-east) and Pollock Castle (1.5 miles south). For a walk, there is Neilston Pad and Brother Loch.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Keep children and pets away from the room on the day
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
How to get a price
Most clients in Parkhouse get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
What affects the price in Parkhouse
Prices start from £350. We don’t charge extra for travel to Parkhouse. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- The size and number of damaged areas
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
Two or three clear photos are usually enough. It helps if you send:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Something in shot to show the size
- A wider photo showing the whole bath
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Honest limits
In fairness, there are a few things a repair will not fix:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Prices start from £350. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why Parkhouse clients choose us
- Usually one visit, start to finish
- Straight answers about what a repair can do
- Colour-matched on site
- Rooms protected and left tidy
Take a look at our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
