Isle of Wight · England
Bath Re-enamelling in Parkhurst
We travel to Parkhurst for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
Bath re-enamelling at your home in Parkhurst
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Common call-outs are for enamel that’s lost its shine and feels rough and staining under the taps and around the waste, on acrylic baths, basins & shower trays and cast iron baths.
Every repair is covered by our one-year guarantee, wherever you are in Isle of Wight.
- Area
- Parkhurst (PO30)
- County
- Isle of Wight
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We take into account:
- Any earlier repairs that need removing first
- How many areas need work
- The material and finish
- How hard the colour is to match
The price reflects the work involved, not where you live. The full price is agreed before booking, with nothing added on the day.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- Details of any past repairs
- The material, if you know it
Email us pictures of the damage and one of the entire item, and tell us you’re in Parkhurst, and we will reply with a fixed price.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Isle of Wight and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair won’t do:
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before you book.
Materials we work on in Parkhurst
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Your questions about bath re-enamelling in Parkhurst
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How much does bath re-enamelling cost in Parkhurst?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed quote includes everything.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Can you quote from photos?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Our work in Parkhurst
Parkhurst is about 1 mile north of Newport, in Isle of Wight. We visit homes and businesses in Parkhurst and the surrounding area, so there’s no workshop to go to. Parkhurst is one of 125 places in Isle of Wight we cover. You can also see our page for London, about 75 miles away.
All of PO30 is within our area. That includes homes on Dodnor Lane, Argyle Road and Sherwood Road. Nearby, we also work in Noke Common (1 mile north-west), Hunny Hill (1 mile south), Forest Side (1 mile south-west), Northwood (2 miles north) and Rew Street (2 miles north-west). Further out, we also cover Ryde (6 miles east), Cowes (3 miles north), Sandown (8 miles south-east), Shanklin (8 miles south-east), Ventnor (9 miles south-east) and East Cowes (3 miles north). Remote and island addresses take a little more planning, so call us to arrange it.
What’s near Parkhurst
Typical jobs here are in homes near Hunnyhill Primary School, Medina College and Seaclose Park. You’ll also find The Stag pub (0.5 miles north) and Island Innovation VI Form Campus (1.4 miles south). Other landmarks nearby include Isle of Wight Bus & Coach Museum (1 mile south-east) and Carisbrooke Castle (2.1 miles south). Green spaces nearby include Mill Hill and Briddlesford Nature Reserve.
Do you need bath re-enamelling in Parkhurst?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Contact us if you’ve noticed any of these:
- A coating lifting around the plughole
- An outdated colour you’d like to change
- Thin, worn enamel in places
- A roll-top that’s seen better days
What to look for in a quote
- Whether they match the colour on site
- Whether there are any call-out or travel charges
- How to care for the finish
- Is the price fixed, and does it include VAT?
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, with no extra for Parkhurst. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Parkhurst customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- Every repair guaranteed for a year
Read our prices page and bath cost comparison.
Also near Parkhurst
What else we do in Parkhurst
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a full day in most cases. We leave the room clean and you’ll know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Have a window or extractor fan available
Get a quote
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
