Kent · England
Bath Re-enamelling for Peene homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Peene. Send photos for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Never use suction bath mats
- A dripping tap should be fixed promptly
- Respect the curing time we give you
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our bath re-enamelling in Peene
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with stains that won’t shift and a peeling or bubbling previous coating, we can help, whatever the material.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Peene (CT18)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
About Peene
Peene is about 2 miles north-west of Folkestone, in Kent. Wherever you are in the CT18 postcode area, a technician comes to you. Peene is one of 922 towns and villages in Kent we cover. You can also see our page for London, about 59 miles away.
Jobs in CT18 are booked in the same way as anywhere else. Neighbouring places we cover include Newington (1 mile south-west), Arpinge (1 mile north-east), Cheriton (1 mile south-east), Etchinghill (1 mile north-west) and Seabrook (2 miles south). Larger places within reach include Ashford (11 miles west), Canterbury (13 miles north), Dover (8 miles east), Deal (14 miles north-east), Hythe (3 miles south-west) and Tower Hamlets (8 miles east).
Near you in Peene
In Peene, that means homes near Cheriton Primary School, Church of St Nicholas and Turner Free School, among other places. The nearest railway station is Folkestone West station, about 1.8 miles south-east of the centre. A little further out are Elham Valley Countryside Centre And Railway Museum (under half a mile west) and Folkestone Castle (1.8 miles east). Green spaces nearby include Cheriton Hill.
Repair or replace: which is better?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Nothing taken out or refitted
- Generally one visit, start to finish
- Straight answers about what a repair can do
- One-year guarantee on every repair
Take a look at our pricing or bath cost comparison.
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
What affects the price in Peene
Prices start from £350. You will know the full cost before you book. We take into account:
- What the surface is made of
- Previous DIY repairs that have to come out
- How hard the colour is to match
- How much damage there is
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Quotes from your photos
We price nearly every job from pictures. This is what we need:
- One picture of the whole bath
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Other services in Peene
How the visit works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow most of the day, and we’ll tell you if anything changes.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Ask for a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
For anyone letting property in or around Peene, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
What we can’t put right
A repair is not right for every job, including:
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Your questions about bath re-enamelling in Peene
How much does bath re-enamelling cost in Peene?
Prices start from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
