Kent · England
Bath re-enamelling & resurfacing in Seabrook, Kent
Full bath re-enamelling and resurfacing in Seabrook, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Thin, worn enamel in places
Landlord and trade work in Seabrook
If you manage property in Seabrook, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How we handle bath re-enamelling in Seabrook
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for several chips and rust patches and enamel that’s lost its shine and feels rough, on acrylic baths, basins & shower trays and pressed steel baths.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Area
- Seabrook (CT21, CT20)
- County
- Kent
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Seabrook
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
What information do you need?
Photos of the damage, a photo of the entire bath and your postcode. Then we’ll agree a date.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Rinse off hair dye, oils and bath bombs immediately
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Also in Seabrook
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Read more
Seabrook and nearby
Seabrook is about 2 miles east of Hythe, in Kent. Anywhere in CT21, a technician comes to you. Our repair technicians cover all 922 towns and villages in Kent, from the larger towns to small villages. Our jobs stretch from Seabrook to London (60 miles away).
Here we cover the CT21 and CT20 postcode area. Streets in the area include Sandy Lane, Spring Lane and Naildown Road, all of which we cover. We also travel to Sandgate (1 mile east), Newington (1 mile north), Cheriton (1 mile north-east), Hythe (2 miles west) and Peene (2 miles north). Further out, we also cover Ashford (12 miles north-west), Canterbury (14 miles north), Dover (9 miles north-east), Deal (15 miles north-east), Tower Hamlets (9 miles north-east) and Walmer (15 miles north-east).
Landmarks near Seabrook
Typical jobs here are in homes near Seabrook Church, Oaklands Park and Seabrook Church of England Primary School. Also close by are The Folkestone School for Girls (1.4 miles east) and The Fountain pub (under half a mile south). The closest station to Seabrook is Folkestone West station, about 1.7 miles north-east. Other landmarks nearby include Royal Victoria Hospital (2.5 miles east) and Hythe Museum (1.6 miles west). Open spaces near Seabrook include Tolsford Hill.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Send us photos and we’ll tell you honestly before you book.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
How we price bath re-enamelling
Resurfacing from £350. You will not pay by the hour. The price depends on:
- How easy the damage is to reach
- How many items we do on one visit
- The material and finish
- Any earlier repairs that need removing first
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
We price nearly every job from pictures. This is what to send:
- Something in shot to show the size
- Any details about the material
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Do you need bath re-enamelling in Seabrook?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
These are the problems we are asked about most:
- An outdated colour you’d like to change
- Staining under the taps and around the waste
- An old resurfacing that is failing
- An original cast iron bath that needs restoring
Before you book anyone
- How the colour is matched
- A fixed quote, and whether VAT is included
- How your room will be protected
- How long it needs to cure
About our accreditations · Every repair comes with a one-year guarantee.
