Kent · England
Bath re-enamelling & resurfacing in Perry, Kent
Problem with your bath in Perry? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that is failing
- A roll-top that is seen better days
How to look after the repair
Looking after the surface is easy:
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Bath re-enamelling at your home in Perry
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s brown or grey marks that don’t clean off and a bath in a colour that no longer suits, we can typically put it right.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Perry (CT3)
- Region
- Kent
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath re-enamelling in Perry?
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.
If you can see any of these, send us a photo:
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
- A bath in a colour that no longer suits
- Wear marks under the taps
Comparing quotes
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- Aftercare advice
- Who turns up on the day
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Also near Perry
Other services in Perry
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- What kind of damage it is
- What the surface is made of
- The colour and finish to match
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- Natural light rather than flash
- Something in shot to show the size
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Repairing versus replacing in Perry
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You’ll see the full price before you book.
Why us?
- Every repair guaranteed for a year
- A fixed quote before booking
- Everything repaired in place
- Colour mixed on the day to match
Read our pricing or resurfacing vs replacement cost guide.
Perry and nearby
Perry is about 7 miles east of Canterbury, in Kent. From the centre of Perry to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We cover 922 places across Kent, from the larger towns to small villages. Our jobs stretch from Perry to London (59 miles away).
We work across CT3 and the streets around it. From Walmestone Road and Perry Lane or a nearby road, a technician can come to you. We also travel to Nash (1 mile east), Shatterling (1 mile south), Hoaden (1 mile east), Elmstone (1 mile north) and Broomhill (1 mile south-west). Within a short drive, we also cover Canterbury (7 miles west), Margate (9 miles north-east), Dover (11 miles south), Folkestone (14 miles south), Ramsgate (8 miles north-east) and Broadstairs (10 miles north-east).
Landmarks near Perry
Typical jobs here are in homes near Elmstone Church and Preston Primary School. The nearest railway station is Adisham station, roughly 3.6 miles south-west of the centre. Well-known places in the area include St Martins Hospital (5.6 miles west). Open spaces near Perry include Monk's Wall nature reserve.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
What we can’t put right
Before booking, it’s worth knowing the limits:
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Cast iron baths
The process
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. It normally takes a full day.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Have a window or extractor fan available
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Get a quote
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Advice
Perry questions
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send photos.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
About our accreditations · Every repair comes with a one-year guarantee.
