Flintshire · England
Bath Re-enamelling for Llawndy homes
Bath re-enamelling in and around Llawndy: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- An outdated colour you’d like to change
Bath re-enamelling in Llawndy, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We work on cast iron baths, pressed steel baths and acrylic baths, and the jobs we see most are a coloured bath you want in white and stains that won’t shift.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will come back.
- Where
- Llawndy (CH8)
- Region
- Flintshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Covering Llawndy
Llawndy is about 4 miles east of Prestatyn, in Flintshire. Clients in Llawndy get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We work in 139 places in Flintshire, from the larger towns to small villages. Our nearest city page is Liverpool, about 17 miles away.
Every address in CH8 is covered, from the main roads to the quietest streets. We also travel to Talacre (1 mile north-east), Gwespyr (1 mile south-west), Tanlan (1 mile south-east), Picton (1 mile south) and Glasdir (1 mile south-east). We also work in nearby towns such as Connah's Quay (14 miles south-east), Buckley (15 miles south-east), Flint (11 miles south-east), Mold (15 miles south-east), Holywell (6 miles south-east) and Higher Shotton (15 miles south-east).
Landmarks near Llawndy
We visit homes around The Lodge Inn and the streets around them. The nearest railway station is Prestatyn station, roughly 3.4 miles west. Well-known places in the area include Prestatyn Community Hospital (3.4 miles west) and Bryn Castell (2.7 miles south). For a walk, there’s Llyn Helyg and St Elmo's Summer House.
When we’d advise against a repair
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
- A metal bath with a through crack
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Llawndy
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For landlords and businesses
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Landlords, letting agents and housing providers in Llawndy use us as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Do not use the bath until it has fully cured
- Do not let dyes or oils sit on the finish
- Get any chip repaired quickly
- Don’t leave bottles, razors or sponges standing on the surface
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Other services in Llawndy
Llawndy questions
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it safe with children and pets around?
Just keep them out of the work area. We’ll tell you when the room can be used again.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Can you repair something that is been repaired before?
Usually, yes. The old repair comes out first, so mention it when you send pictures.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Signs you need bath re-enamelling in Llawndy
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
You may need us if you’ve spotted:
- Stains that won’t shift
- Lots of chips and rust spots
- A bath in a colour that no longer suits
- A coating lifting around the plughole
What to look for in a quote
- Who will actually do the work
- What prep work is covered
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
What affects the price in Llawndy
Resurfacing from £350. There is no charge for travel to Llawndy. The price comes down to:
- The colour and finish to match
- Whether we combine several jobs
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
We price nearly every job from photos. This is what we need:
- Daylight if possible, and no flash reflection
- The material, if you know it
- A clear, close picture of the problem area
- Where you are, by postcode
Send us pictures of the damage and one of the entire item, and tell us you are in Llawndy, and we’ll reply with a fixed price.
What happens on the day
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow the best part of a day from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
