Redcar and Cleveland · England
Bath Re-enamelling in Port Mulgrave
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Port Mulgrave. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A dull, rough surface that will not come clean
Looking after it afterwards
To keep it looking its best for years:
- Avoid suction-cup mats
- Fix dripping taps quickly
- Get any chip repaired quickly
- Wash away dyes and oils after use
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Bath re-enamelling in Port Mulgrave, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on cast iron baths, acrylic baths and basins & shower trays, and common reasons people get in touch are worn patches where water runs and sits and enamel that’s lost its shine and feels rough.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Area
- Port Mulgrave (TS13)
- County
- Redcar and Cleveland
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Also near Port Mulgrave
Other services in Port Mulgrave
Do you need bath re-enamelling in Port Mulgrave?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
- Chips and rust in more than one place
- A bath in a colour that no longer suits
Before you book anyone
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- How to look after the finish
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We clean up when we are done and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Mention any parking restrictions or tricky access
- Keep a parking space free if you can
- Let the surface dry out before the visit
How to get a price
Email us a photo of the damage and one of the whole item, with your TS13 postcode, and we’ll come back with a fixed quote.
Read more
Landlord and trade work in Port Mulgrave
Housing associations and facilities teams use us for planned and reactive repairs in Redcar and Cleveland and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Port Mulgrave and nearby
Port Mulgrave is about 7 miles north-west of Whitby, in Redcar and Cleveland. From the centre of Port Mulgrave to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 48 towns and villages across Redcar and Cleveland, from the larger towns to small villages. You can also see our page for Newcastle upon Tyne, about 46 miles away.
Postcode districts we cover here: TS13. We also travel to Hinderwell (1 mile south), Staithes (1 mile north-west), Runswick Bay (1 mile south-east), Newton Mulgrave (1 mile south) and Cowbar (1 mile north-west). Further out, we also cover Redcar (12 miles west), Guisborough (11 miles west), Eston (15 miles west), Marske-by-the-Sea (10 miles west), Grangetown (15 miles west) and Skelton-in-Cleveland (9 miles west).
Near you in Port Mulgrave
In Port Mulgrave, that means homes near Oakridge Community Primary School, The Badger Hounds Public House and Church of St Hilda, among other places. A little further out are Staithes Museum (1.2 miles north-west) and Mulgrave Castle (4.5 miles south-east).
Port Mulgrave questions
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you resurface freestanding baths?
Yes, often. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- A bath split right through the body
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Send us photos and we will tell you honestly.
Materials we work on in Port Mulgrave
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
Can I fix it myself?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
Why us?
- We come to you, anywhere in the UK
- A year’s guarantee on all work
- Dust sheets down, tidy finish
- Same prices wherever you are
Take a look at our pricing and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
