Redcar and Cleveland · England
Bath Re-enamelling in Cowbar
Full bath re-enamelling and resurfacing in Cowbar, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Wear marks under the taps
- A period or roll-top bath worth keeping
Aftercare tips
Nothing complicated is needed:
- Repair dripping taps early
- Don’t use the bath until it has fully cured
- Store bottles off the bath
- Wash away dyes and oils after use
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Bath re-enamelling at your home in Cowbar
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Our technicians work on basins & shower trays, cast iron baths and Victorian roll-tops, and people most often call us about a peeling or bubbling previous coating and chips and rust in more than one place.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Cowbar (TS13)
- Area hub
- Redcar and Cleveland
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Cowbar
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Clients typically contact us about:
- Enamel that is lost its shine and feels rough
- Wear marks under the taps
- Stains that will not shift
- Lots of chips and rust spots
What to look for in a quote
- Whether the colour is mixed to match
- Aftercare advice
- Who will actually do the work
- When it can be used again
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll arrange it.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Why repair rather than replace?
A replacement frequently means several trades over several days. Resurfacing takes one technician and typically a day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
Why us?
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
- Most jobs done in one visit
See our prices page and bath cost comparison.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- The material
- What kind of damage it is
- Doing more than one item at once
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- Something in shot to show the size
- Details of any past repairs
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Your questions about bath re-enamelling in Cowbar
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
How do I get a price for bath re-enamelling in Cowbar?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
How long does re-enamelling last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you work in Cowbar?
Yes, we do. Technicians travel to Cowbar from across the region, and the price is the same as everywhere else.
Where we work around Cowbar
Cowbar is about 9 miles north-west of Whitby, in Redcar and Cleveland. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in all 48 towns and villages across Redcar and Cleveland. Our nearest city page is Newcastle upon Tyne, about 45 miles away.
Every address in TS13 is within our area. That includes homes on Cowbar Bank and Cowbar Lane. Nearby, we also work in Staithes (1 mile south), Port Mulgrave (1 mile south-east), Hinderwell (2 miles south-east), Newton Mulgrave (2 miles south) and Runswick Bay (2 miles south-east). Within a short drive, we also cover Redcar (11 miles west), Guisborough (11 miles west), Eston (14 miles west), Marske-by-the-Sea (9 miles west), Grangetown (14 miles west) and Skelton-in-Cleveland (8 miles west).
Landmarks near Cowbar
Our clients here include homes close to Former Bethel Congregational Church, The Black Lion Public House and Staithes. Well-known places in the area include Staithes Museum (within half a mile east) and Kilton Castle (4.9 miles west).
Places near Cowbar
What else we do in Cowbar
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take most of the day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
Ask for a price
To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
